ProgrammingChapter —7
242 700Series Color MobileComputer User’s Manual
FTP Server
FTP support is provided through the FTP Se rver application
FTPDCE.EXE (MS WindowsCE Versions) which is provided as part the
base system.
FTPDCE is the Internet File Transfer Protocol (FTP) server process. The
server can be invoked from an applicationor command line. Besides ser-
vicing FTP client requeststhe FTP Server alsosend a “network announce-
ment” to notify prospectiveclients of server availability.
Note: You should consult the RFC959 specification for proper use of
some of these commands at the following URL:
Shttp://www.ietf.org/rfc/rfc959.txt for the text version, or
Shttp://www.w3.org/Protocols/rfc959/for an html version
Do the following to send commands:
1Start an FTP client and connect to the device FTP server.
2Log in with “intermec” as the user name and “cr52401” for the pass-
word.
3From the FTP client, send the command.
4Wait for a response.

Synopsis

ftpdce [options ]
Options
–Aaddr (where addr is in the form of a.b.c.d) Sets the single target address to which to send the networkan -
nouncement. Default is broadcast.
–Bbyte Sets the FTP data blocks ize. Smaller sizes may be useful over slower links. Default is 65536.
–Cname Sets the devicename. Used by Intermec management software.
–Fvalue Disables the default Intermec account. Avalue of “0” disables the account. Default is “1”.
Note that disablingthe default account without providing a working access control list on the server
willresult in a device that will not accept any FTP connections.
–Hsec Sets the interval between network announcements in seconds.A value of “0” turns the network an-
nouncement off. Default is 30 seconds.
–Iaddr (where addr is in the form of a.b.c.d) Sets the preferred 6920 Communications Server (optional).
–Llog (where log is either “0” or “1”) Sets the state oflogging. Default is 0 (disabled).
–Nsec Specifiesthe numberof seconds to wait before initiallystarting FTP server services.
–Pport Sets the UDP port onwh ich the network announcement will be sent. Default port is 52401.
–Qport Sets the port on which the FTP Server will listen for connections. Defaultportis21.
–Rdir Sets the FTP mount point to this directory. Default is the root folderof the object store.
–Tscrip Sets the script name for the 6920 Communications Server to process.
–Uurl Sets the default URLfor this device.
–Z“parms” Sets extended parameters to be included in the network announcement.