ConfigurableSet tingsAppendix —A
364 700Series Color MobileComputer User’s Manual
CAB Files
You can view the latestdeveloper or released version of each CAB file from
Intermec Technologies Corporation that are installed i n your 700 Color
Computer via the Unit Information control panel applet. Custom CAB
files are not displayed in this applet.See th e Software Tools User’s Manual for
more informationabout these files.
To access the information from the 700 Color Computer, tap Start >
Settings >theSystem tab > Unit Information >theCABFiles tab to view
thecurrentCABfileversions.Tapokto exit this information.
When a CAB file is built, a registry entry is created with a build number
for that file. This CAB Files controlpanel applet looks for a registry key
for each CABfile installed. When the registryentry is found, the CAB file
name and version number information are displayed. If a CAB file has not
been installed,then its information is not displayed.
Below is a list of CAB files from Intermec Technologies th at are available
foryour700ColorComputerwiththeirlatestdeveloperorreleasedver-
sion of the software build. Should you ne ed to add any of these to your
700 Color Computer, contact an Intermec representative .
SBtMainStack:
Installation of the Main Bluetooth Stack is handled automatically as part
of the operatingsystem boot-up procedure. See Chapter 4, “Network
Support,” for more information about Bluetooth wireless printing.
SComm Port Wedge:
ThesoftwarebuildfortheCommPortWedge.Notethat the Comm Port
Wedge CAB file is available.
SNPCPTest:
This installsa Norand
®
PortableCommunications Protocol (NPCP)
Printing test applicationwhich will print to an Intermec
®
4815, 4820,
or 6820 Printer. See Chapter 5, “Printer Support,” for more information.