6Press or until On appears.

7Press or repeatedly until you reach Discovery Mode.

8Press or until On appears.

9Press or repeatedly until you reach Security.

10Press or until Low or High appears, depending on the one you want.

11Press or repeatedly until you reach Pass Key if you need to define a pass key number (similar to a password) for the device.

If you are defining a pass key, use the keypad numbers to enter the pass key number.

12Pressto save and exit.

The message Bluetooth Default Print Settings Saved appears. The control panel returns to the

Change Bluetooth Default Settings submenu.

Printing using Bluetooth

You can print photos from a Bluetooth-enabled device such as a camera phone using a Bluetooth adapter.

1Load photo paper with the glossy or printable side facing down. (If you are not sure which side is the printable side, see the instructions that came with the paper.)

2Make sure that the Bluetooth Enable and Discovery Mode menu items on your printer control panel are set to On. For more information, see “Setting the Bluetooth mode” on page 110.

3Insert a Bluetooth adapter into the PictBridge port on the front of the printer.

SD/M

 

MS

MC

XD

CF/

 

 

MD

 

 

 

PictBr

 

 

idge

Note: A Bluetooth adapter is sold separately.

4Once the printer detects the Bluetooth adapter, the following message appears on the printer display for five seconds: Bluetooth Dongle Connected.

Warning: Do not touch cables, the Bluetooth adapter, or the printer in the area shown while actively printing from the Bluetooth-enabled device. A loss of data can occur. Also, do not remove the Bluetooth adapter while actively printing from the Bluetooth-enabled device.

111

Page 111
Image 111
Lexmark 9300 Series manual Printing using Bluetooth, 111