Lexmark 9300 Series manual Using the small media feeder

Load up to		Make sure
100 sheets of custom-size paper		•	The print side of the paper faces down.
		•	The paper size fits within these dimensions:
			Width:
			– 76.2–215.9 mm
			– 3.0–8.5 inches
			Length:
			– 127.0–431.8 mm
			– 5.0–17.0 inches
		•	The paper guides rest against the left, right, and bottom edges of the
			paper.
20 sheets of banner paper		•	The print side of the banner faces down when loading.
		•	The leading edge of the banner paper feeds into the printer first.
		•	You have selected the correct paper size for the banner in Printing
			Preferences. For more information, see “Using the Printing
			Preferences tabs” on page 69.
		To load banner paper:
	1		Pull Tray 1 completely out of the printer.
	2		Remove all paper from Tray 1.
	3		Move the paper guides as though you were loading legal-size paper.
	4		Squeeze the lever and pull to extend the tray to legal size.
	5		Tear off only the number of pages needed to print the banner.
	6		Set the stack of pages in front of the printer.
	7		Slide the first sheet from the banner stack of pages over the Tray 1
			handle. Slide it all the way into the back of Tray 1.

8Send the job to print.

Using the small media feeder

The small media feeder, located on top of the paper exit tray toward the back, lets you load envelopes, 4 x 6 photo paper, and other small card sizes without having to place them in Tray 1.

The small media feeder is helpful when:

•You want to print only one photo and you do not want to load Tray 1 with a photo card.

•You want to print one envelope for a letter. You would print the letter from paper loaded in Tray 1. Then, you print the envelope quickly from the small media feeder.

81