Cannot print from a Bluetooth-enabled device

Make sure that the Bluetooth mode and the Bluetooth Discovery mode are enabled on your printer

Make sure you type in the correct pass key

Make sure that the external Bluetooth-enabled device is configured to communicate with the Bluetooth adapter connected to your printer

Copy troubleshooting

“Copier does not respond” on page 159

“Scanner unit does not close” on page 159

“Poor copy quality” on page 159

“Partial document or photo copies” on page 160

1From the control panel, press or repeatedly until Setup is highlighted.

2Press .

3Press or repeatedly until Change Bluetooth Default Settings is highlighted.

4Press .

The Bluetooth Default Settings menu appears with the option for Bluetooth Enabled highlighted.

5Press or repeatedly until On appears.

6Press or repeatedly until the option for Discovery Mode is highlighted.

7Press or repeatedly until On appears.

8Press .

If you set Security to High, you must type in the pass key from another Bluetooth-enabled device

Consider setting Security to Low to eliminate the need for a pass key:

1From the control panel, press or repeatedly until Setup is highlighted.

2Press .

3Press or repeatedly until Change Bluetooth Default Settings is highlighted.

4Press .

The Bluetooth Default Settings menu appears.

5Press or repeatedly until the option for Security is highlighted.

6Press or repeatedly until Low appears.

7Press .

For more information, refer to the documentation that came with the external Bluetooth-enabled device.

158

Page 158
Image 158
Lexmark 9300 Series manual Copy troubleshooting, Cannot print from a Bluetooth-enabled device, 158