Error message

Phone Line Busy

Phone Line Error

Solution

The printer automatically redials three times at 2-minute intervals. You can change the default settings to redial up to five times at intervals of up to 8 minutes.

To change the redial settings:

1From the control panel, press or repeatedly until Fax is highlighted.

2Press .

The Fax Mode menu appears.

3Press or repeatedly until Fax Setup is highlighted.

4Press .

5Press or repeatedly until Dialing and Sending is highlighted.

6Press .

7To change the length of time between redials:

aPress or repeatedly until Redial Time is highlighted.

bPress or until the option you want appears.

cPress .

8To change the number of times the printer redials:

aPress or repeatedly until Redial Tries is highlighted.

bPress or until the option you want appears.

cPress .

You can also postpone sending your fax until a later time. For more information, see “Sending a broadcast fax at a scheduled time” on page 128.

If the telephone line is being used by another device, wait until the other device is finished before sending the fax.

Make sure cable connections for the following hardware are secure, if applicable:

Power supply

Telephone

Handset

Answering machine

Are you sending a fax while you listen to a call (On Hook)? Enter a fax number immediately. For more information, see “Sending a fax while listening to a call (On Hook Dial)” on page 129.

183

Page 183
Image 183
Lexmark 9300 Series manual 183