Lexmark 9300 Series manual

Use this	To
Set Date and Time	Set the current date and time and using the keypad numbers.

Paper Handling	Change settings related to the loading of paper in the paper tray or trays. For
	more information, see “Using the Paper Handling submenu” on page 54.

Language	Change the language shown on the control panel.

Country	Change the country or region shown on the control panel to your country or region.

Key Press Tone	Set the volume of the tone when a control panel button is pressed to either On or
	Off. On is the default.

Power Save	Set the printer to enter a power saving mode at or after a certain time limit. Values
	are Now, After 10 Min, After 30 Min, After 60 Min, and Never.

Block Host Settings	Allow your system support person to block to prevent individual users on a
	network from making printer setting changes using the Printer Setup Utility.

Caller ID Pattern	Indicate different identification methods for alternate caller ID patterns in different
	countries or regions. Values are Pattern 1 and Pattern 2. For more information,
	see “Using Caller ID” on page 131.

Speaker Volume	Set the volume of the speaker during a call. Values are Off, Low, and High.

Using the Change Copy Default Settings submenu

1From the Setup menu, press or repeatedly until Change Copy Default Setting is highlighted.

2Press .

3After changing values, pressto save these values and exit this submenu.

Use this	To
Color	Specify to print in color or black and white.

Quality	Specify to print in Auto, Draft, Normal, or Photo mode.
	Note: Auto and Photo are good for pictures and paper-based print jobs. Auto is
	good for printing on transparencies.

Content Type	Specify the type of document you want to print. Values are Text & Graphics,
	Photo, Text Only, and Line Drawing.

2-sided copies	Specify whether the original is one- or two-sided and whether you want the copy
	to be one- or two-sided.
	Note: This applies only to copy jobs when the duplex unit is installed.

Paper Handling	Change settings related to the loading of paper in the paper tray or trays. For
	more information, see “Using the Paper Handling submenu” on page 54.

1From the Setup menu, press or repeatedly until Change Photo Default Settings is highlighted.

2Press .

3After changing values, pressto save these values and exit this submenu.