Microsoft 2004 manual Disable the Access Rules created by the Network Template

Disable the Access Rules created by the Network Template

The next step is to disable the Access Rules created by the Network Template. In this example, we disable the Access Rules created by the 3-Leg perimeter template. You can perform a similar procedure if you used the Front-end firewall Network Template. We want to use these rules later, so we will disable the rules instead of deleting them. Later, we will re- enable the Access Rules created by the Network Template.

Perform the following steps to disable the Access Rules created by the Network Template:

1.At the ISA Server 2004 firewall computer, open the Microsoft Internet Security and Acceleration Server 2004 management console and expand your server name in the left pane of the console. Click on the Firewall Policy node.

2.In the Details pane, click on the first rule created by the Network Template Wizard. Hold down the CTRL key on the keyboard and click the second rule created by the Wizard. Notice that both rules are now highlighted. Right click the highlighted rules and click Disable.

3. Click Apply to save the changes and update the firewall policy.

4.Click OK in the Apply New Configuration dialog box.

ISA Server 2004 Configuration Guide 135