Teledyne gfc 7000ta operation manual Compact Report, Starting Date

Operating Instructions Model GFC7000TA Carbon Dioxide Analyzer

6.7.2.8. RS-232 Report Function

The GFC 7000TA DAS can automatically report data to the communications ports, where they can be captured with a terminal emulation program or simply viewed by the user.

To enable automatic COM port reporting, follow the instruction shown in Section 6.7.2.2 then press:

From the DATA ACQUISITION menu

(see Section 6.7.2.2)

Edit Data Channel Menu

SETUP X.X	0) CONC:	ATIMER,	1,	900
PREV NEXT	INS	DEL EDIT	PRNT	EXIT
SETUP X.X	NAME:CONC
<SET SET> EDIT PRINT				EXIT

Exits to the main Data Acquisition menu

Toggle to turn

reporting ON or OFF

Press SET> key until…

SETUP X.X RS-232 REPORT: OFF
<SET SET> EDIT PRINT		EXIT
SETUP X.X	RS-232 REPORT: OFF
OFF		ENTR EXIT

ENTR accepts the new setting and returns to the previous menu.

EXIT ignores the new setting and returns to the previous menu.

6.7.2.9. Compact Report

When enabled, this option avoids unnecessary line breaks on all RS-232 reports. Instead of reporting each parameter in one channel on a separate line, up to five parameters are reported in one line.

6.7.2.10. Starting Date

This option allows to specify a starting date for any given channel in case the user wants to start data acquisition only after a certain time and date. If the Starting Date is in the past, the DAS ignores this setting.

Teledyne Analytical Instruments 85