Teledyne gfc 7000ta operation manual From the Data Acquisition menu

Operating Instructions Model GFC7000TA Carbon Dioxide Analyzer

6.7.2.5. Editing DAS Parameters

Data channels can be edited individually from the front panel without affecting other data channels. However, when editing a data channel, such as during adding, deleting or editing parameters, all data for that particular channel will be lost, because the DAS can store only data of one format (number of parameter columns etc.) for any given channel. In addition, an DAS configuration can only be uploaded remotely as an entire set of channels. Hence, remote update of the DAS will always delete all current channels and stored data.

To modify, add or delete a parameter, follow the instruction shown in Section 6.7.2.2 then press:

From the DATA ACQUISITION menu

(see Section 6.7.2.2)

Edit Data Channel Menu

SETUP X.X	0) CONC:	ATIMER,	1,	900
PREV NEXT	INS	DEL EDIT	PRNT	EXIT
SETUP X.X	NAME:CONC
<SET SET> EDIT PRINT				EXIT

Exits to the main Data Acquisition menu

YES will delete all data in that entire channel.

Moves the

display between

existing Parameters

Press SET> button until…

SETUP X.X	PARAMETERS:1
<SET SET> EDIT PRINT		EXIT
SETUP X.X	EDIT PARAMS	(DELETE DATA)
YES NO

Edit Data Parameter Menu

SETUP X.X	0) PARAM=CONC1, MODE=AVG
PREV NEXT	INS DEL EDIT	EXIT

NO returns to the previous menu and retains all data.

Exits to the main Data Acquisition menu

Inserts a new Parameter	Deletes the Parameter	Use to configure
before the currently		the functions for
	currently displayed.
displayed Parameter		this Parameter.

Teledyne Analytical Instruments 80