Teledyne gfc 7000ta operation manual Getting Started Model GFC7000TA Carbon Dioxide Analyzer

Getting Started Model GFC7000TA Carbon Dioxide Analyzer

10. Attach a source of dried air scrubbed of CO2 to the purge inlet port.

NOTE

The minimum gas pressure of the source of purge air should be 7.5 psig.

If the source of the purge air is shared by a Teledyne Instruments T700 (as shown in figure 3-7) the minimum gas pressure should be 25 psig and should not exceed

35psig.

11.Once the appropriate pneumatic connections have been made, check all pneumatic fittings for leaks using a procedure similar to that defined in Section 9.3.3.

Teledyne Analytical Instruments 29