Teledyne gfc 7000ta Expendable Kits Options 42C, 42D, Option Number Description OPT 42C, OPT 42D

FAQ Model GFC7000TA Carbon Dioxide Analyzer

∙Remove the set screw located in the top, center of the rear panel

∙Remove the screws fastening the top cover to the unit (four per side).

∙Slide the cover back and lift straight up .

4.Disconnect the current loop option PCA from the appropriate connector on the motherboard (see Figure 5-1).

5.Place a shunt between the leftmost two pins of the connector (see Figure 5-1).

6.Reattach the top case to the analyzer.

7.The analyzer is now ready to have a voltage-sensing, recording device attached to that output

5.3. Expendable Kits (Options 42C, 42D and 43)

OPTION NUMBER	DESCRIPTION
OPT 42C	1 year’s supply of replacement of 47mm dia. particulate filters
OPT 42D	1 full replacement’s volume of indicating soda-lime for the external CO2 scrubber
	included with options 51 & 53 (approximate active lifetime: 1 year)
OPT 43	Options 42 C & 42D

Teledyne Analytical Instruments 53