Teledyne gfc 7000ta operation manual Enter Setup Pass

Operating Instructions Model GFC7000TA Carbon Dioxide Analyzer

Example: If all passwords are enabled, the following keypad sequence would be required to enter the SETUP menu:

prompts for password

number

See Table 6-8 for

Passwords and Levels

Press individual buttons to set numbers

SAMPLE		RANGE = 500.000 PPM			CO2 =X.XXX
< TST TST > CAL						SETUP
SAMPLE			ENTER SETUP PASS: 0
0	0	0		ENTR		EXIT
SAMPLE			ENTER SETUP PASS: 0
8	1	8		ENTR		EXIT
SETUP X.X PRIMARY SETUP MENU
CFG DAS RNGE PASS CLK MORE						EXIT

Example: this

password enables the

SETUP mode

Note that the instrument still prompts for a password when entering the VARS and DIAG menus, even if passwords are disabled, but it displays the default password (818) upon entering these menus. The user only has to press ENTR to access the password-protected menus but does not have to enter the required number code.

Teledyne Analytical Instruments 98