Teledyne gfc 7000ta Display and Touchscreen Control Description, Description/Function Field

Getting Started					Model GFC7000TA Carbon Dioxide Analyzer
	Table 3-1:		Display and Touchscreen Control Description
					Description/Function
Field
Status	LEDs indicating the states of Sample, Calibration and Fault, as follows:
	Name	Color		State	Definition
				Off	Unit is not operating in sample mode, DAS is disabled.
				On	Sample Mode active; Front Panel Display being updated; DAS data
	SAMPLE	Green			being stored.
				Blinking	Unit is operating in sample mode, front panel display being updated,
					DAS hold-off mode is ON, DAS disabled
				Off	Auto Cal disabled
	CAL	Yellow		On	Auto Cal enabled
				Blinking	Unit is in calibration mode
	FAULT	Red		Off	No warnings exist
				Blinking	Warnings exist
Conc	Displays the actual concentration of the sample gas currently being measured by the analyzer in the
	currently selected units of measure
Mode	Displays the name of the analyzer’s current operating mode
Param	Displays a variety of informational messages such as warning messages, operational data, test function
	values and response messages during interactive tasks.
Control Buttons	Displays dynamic, context sensitive labels on each button, which is blank when inactive until applicable.

Figure 3-3 shows how the front panel display is mapped to the menu charts illustrated in this manual. The Mode, Param (parameters), and Conc (gas concentration) fields in the display screen are represented across the top row of each menu chart. The eight touchscreen control buttons along the bottom of the display screen are represented in the bottom row of each menu chart.

Teledyne Analytical Instruments 13