Teledyne gfc 7000ta operation manual To select the Analog Output Range Type press, Sngl Dual Auto

Operating Instructions Model GFC7000TA Carbon Dioxide Analyzer

To select the Analog Output Range Type press:

	SAMPLE*		RANGE = 500.000 PPM		CO2 =X.XXX
	< TST TST > CAL					SETUP
	SAMPLE		ENTER SETUP PASS : 818
	8	1	8		ENTR EXIT
	SETUP X.X
	CFG DAS RNGE PASS CLK MORE					EXIT
	SETUP X.X			RANGE CONTROL MENU
	MODE SET UNIT					EXIT
	SETUP X.X			RANGE MODE: SNGL
Only one of the	SNGL DUAL AUTO				ENTR EXIT
range modes may	Go To			Go To		Go To
be active at any
	Section			Section	Section
time.
	6.7.3		6.7.4		6.7.5

EXIT Returns

to the Main

SAMPLE Display

NOTE

Upper span limit setting for the individual range modes are shared. Resetting the span limit in one mode also resets the span limit for the corresponding range in the other modes as follows:

SNGL	DUAL		AUTO
Range	 Range1		Low Range
	Range2		High Range

Teledyne Analytical Instruments 91