
1
OVERVIEW
1-1 Features of the SRCP Series Controller
The SRCP series is a
When used with a YAMAHA
Using only one SRCP controller allows configuring a complete system for simple applications such as
The SRCP series has the following features:
■A
■Program assets created with the previous SRC, SRCA, ERC, SRCH, ERCX and SRCX series can be used without any modifications.
■Ideal acceleration and deceleration speeds can be obtained by simply entering the number of the robot to control and the payload parameter. No troublesome servo adjustments are re- quired.
■The I/O interface provides 8 input and 5 output points for
■The TPB programming box (option) allows interactive user operation by simple menus that permit immediate use. The robot can also be operated from a personal computer (PC) just the same as TPB when the POPCOM software (option) is installed in the PC.
■Programs for robot operation can be written with an
■Users not accustomed to robot language can use a PLC (programmable logic controller) to directly move the robot by specifying the operation points.
■Users can create programs and control the robot on a personal computer (PC). Communication with the PC is performed with an
■A
■The I/O interface supports pulse trains to allow position control by input of a pulse train.
n NOTE
The SRCP controller can be operated from either a TPB (programming box) or a PC running with communication software such as POPCOM. This user's manual mainly describes operations using the TPB. For details on operation with POPCOM, refer to the POPCOM manual. If you want to use your own methods to operate the SRCP controller from a PC, refer to Chapter 11 "Communications with PC" for pertinent information.