Yamaha SRCP manual Initializing the flash ROM data, From-Init

10-8 Using the internal flash ROM

10-8-3 Initializing the flash ROM data

n NOTE

The internal flash ROM can be used when the SRCP controller version is 24.10 or later and the TPB version is

12.51or later.

1)On the initial screen, press F3 (SYS).

[MENU] select menu

1EDIT2OPRT3SYS 4MON

10

OPERATIONS

2) Next, press F2 (B.UP).

3) Press F2 (FROM).

4)The ID number and auto load function setting in the flash ROM appear on the screen.

Press F3 (INIT) here.

[SYS] select menu

1PRM 2B.UP3INIT 4next

[SYS-B.UP] select menu

1CARD2FROM

[SYS-B.UP-FROM] FROM : 04.03.01 auto load : Invalid 1SAVE2LOAD3INIT

OTHER

5)Following the message, press the emergency stop button on the TPB.

6)A confirmation message appears asking whether to initialize the flash ROM data.

To initialize the flash ROM, press F1 (yes). To cancel, press F2 (no).

7)This screen is displayed during initialization.

[FROM-INIT] press EMG.button

[FROM-INIT] initialize OK ?

1yes 2no

[FROM-INIT]

initializing ...

10-28