Yamaha SRCP manual Error Messages, Error message specifications, Command error message

12-1 Error Messages

12

MESSAGE TABLES

12-1 Error Messages

12-1-1 Error message specifications

The error message transmission format is as follows.

<Error No.> : <Error message> c/r l/f

The length of the <error message> character string is 17 characters. (Spaces are added until the message contains 17 characters.) Thus, the character string length containing the c/r l/f will be 22 characters.

12-1-2 Command error message

Error No.	Message	no start code
	Cause	The start code (@) has not been added at the beginning of the command.
20
	Action	Always make sure the command begins with a start code (@).
Error No.	Message	illegal type
	Cause	The command is erroneous.
21
	Action	Use the correct command.
Error No.	Message	line buf overflow
	Cause	The number of characters in one line exceeds 80.
22
	Action	Limit the number of characters per line to 80 or less.
Error No.	Message	data error
	Cause	There is an error in numeric data.
23
	Action	Correct the data.
Error No.	Message	cannot access
	Cause	Execution is limited by the password or access level (operation level).
24
	Action	Cancel the limit.

12-2