Yamaha SRCP manual 1SAVE2CHG 3CANCEL

10-4 SERVICE mode function

7)When the setting has been changed, the memory write screen appears.

To save the change permanently (retain the change even after the controller power is turned off), press F1 (SAVE).

To save the change temporarily (retain the change until the power is turned off), press F2 (CHG).

[SYS-SAFE-SVCE-DEV] data = 1

PB/DI valid

1SAVE2CHG 3CANCEL

To cancel changing the setting, press F3 (CANCEL).

8)When writing is complete, the screen returns to step 6.

[SYS-SAFE-SVCE-DEV] data = 1

PB/DI valid

n NOTE

The password is identical to the SRCP controller's version number. For example, if the controller version is 24.00, enter 24.00 as the password. Once the password is accepted, it will not be requested unless the TPB is disconnected from the controller or the controller power is turned off.

10

OTHER OPERATIONS

10-12