Yamaha SRCP manual 1EDIT2OPRT3SYS 4CARD

4

BASIC OPERATION OF THE TPB

4-5 Restricting Key Operation by Access Level

5)Select the item you want to change.

To change the access level for editing, press F1 (EDIT).

To change the access level for operation, press F2 (OPRT).

To change the access level for system-related data, press F3 (SYS).

To change the access level for memory card, press F4 (CARD).

6)The currently set access level appears.

To change this setting, use the number key to enter the access level and then press .

7)When the access level has been changed, the memory write screen appears.

To save the change permanently (retain the change even after the controller power is turned off), press F1 (SAVE).

To save the change temporarily (retain the change until the power is turned off), press F2 (CHG).

To cancel changing of the setting, press F3 (CANCEL).

8)When writing is complete, the screen returns to step 6.

[SYS-SAFE-ACLV] select menu

1EDIT2OPRT3SYS 4CARD

[SYS-SAFE-ACLV-EDIT] access level : 0 all access OK

[SYS-SAFE-ACLV-EDIT] access level : 1 change PGM invalid

1SAVE2CHG 3CANCEL

[SYS-SAFE-ACLV-EDIT] access level : 1 change PGM invalid

n

n

NOTE

The password is identical to the SRCP controller's version number. For example, if the controller version is 24.00, enter 24.00 as the password. Once the password is accepted, it will not be requested unless the TPB is disconnected from the controller or the controller power is turned off.

NOTE

To avoid access level conflict between operation and others, the access levels may be automatically adjusted. For example, if the access levels related to editing, system and memory card are "0", they are automatically changed to "1" when the operation-related access level is "1" or "2" or "3". The access levels remain unchanged if they are "1" or "2" or "3".

4-10