Yamaha SRCP manual UP-LOADAREA 3 Select menu

10-6 Using a Memory Card

7)When the load area was selected in step 5, the data load screen appears. Select the data to be loaded.

To load the program data, press F1 (PGM). To load the point data, press F2 (PNT).

To load the parameter data, press F3 (PRM). To load all of the program, point and param- eter data, press F4 (ALL).

8)When F1 (PGM) or F2 (PNT) was selected in step 7, a confirmation message appears ask- ing whether to overwrite the data.

Pressing F1 (yes) overwrites the data only with the same program numbers or point num- bers. (The previous data remains if its program or point number differs from the program or point number to be loaded.)

Pressing F2 (no) loads the data after initial- izing the data in the SRCP controller.

When F4 (ALL) was selected in step 7, all data in the SRCP controller will be initialized and then loaded.

9)A confirmation message appears asking whether to load the data.

To load the data, press F1 (yes) To cancel, press F2 (no).

[B.UP-LOAD]AREA 3 Select menu

1PGM 2PNT 3PRM 4ALL

[B.UP-LOAD]AREA 3 program data overwrite OK ?

1yes 2no

[B.UP-LOAD]AREA 3 program data load OK ?

1yes 2no

10

OTHER

10)This screen is displayed while data is being

loaded.[B.UP-LOAD]AREA 3

loading ...

11)When data loading is complete, the screen re-

turns to step 7.[B.UP-LOAD]AREA 3 Select menu

1PGM 2PNT 3PRM 4ALL

c CAUTION

Never eject the memory card during loading of data.

Do not leave the memory card inserted into the TPB when not in use. This shortens the backup battery life.

OPERATIONS

10-17