Yamaha SRCP manual @SDEL program number,step number, @SMOD program number,step number

11-5 Communication Command Description

(5)@SDEL <program number>,<step number>

Deletes a specified step.

Program number	: This is a number used to identify each program and can be from 0
	to 99.
Step number	: This is a number used to identify each step and can be from 1 to
	255.
Transmission example	: @SDEL 31,99 c/r l/f	Deletes step 99 of program
		No. 31.
Response example 1	: OK c/r l/f
Response example 2	: NG c/r l/f	The specified step number is
	42: cannot find step c/r l/f	not registered.

(6)@SMOD <program number>,<step number>

Modifies data in a specified step. The SRCP controller will transmit READY when this command is received. Confirm that READY is received and then transmit the modification data.

Program number	: This is a number used to identify each program and can be from 0
		to 99.
Step number	: This is a number used to identify each step and can be from 1 to
		255.
Transmission example 1 :		Send	Receive
		@SMOD 0,5 c/r l/f
			READY c/r l/f
		TIMR 50 c/r l/f
			OK c/r l/f
Transmission example 2 :		Send	Receive
		@SMOD 0,5 c/r l/f
			NG c/r l/f
			43: cannot find PGM c/r l/f

(7)@COPY <program number (copy source)>,<program number (copy destination)>

Copies a program. If a program exists in the copy destination, the program will be rewritten.

Program number	: This is a number used to identify each program and can be from 0
	to 99.
Transmission example	: @COPY 0,1 c/r l/f	Copies program No. 0 to
		program No. 1.
Response example 1	: OK c/r l/f
Response example 2	: NG c/r l/f	The program to be copied is
	43: cannot find PGM c/r l/f	not registered.

11

COMMUNICATION WITH

PC

11-31