Yamaha SRCP manual Setting the Service mode functions

10-4 SERVICE mode function

10-4-3 Setting the SERVICE mode functions

1) On the initial screen, press F3 (SYS).

2)Press F4 (next) to change the menu display and then press F1 (SAFE).

3)The password request screen appears. Enter the password and then press .

4)When the password is correct, the screen shown on the right appears.

Press F2 (SVCE) here.

[MENU] select menu

1EDIT2OPRT3SYS 4MON

[SYS] select menu

1SAFE2OPT 3UTL 4next

[SYS-SAFE] Password: 24.00_

input password

[SYS-SAFE] select menu

10

1ACLV2SVCE

5)Select the item whose setting you want to change.

To change the setting that limits the operation device, press F2 (DEV).

To change the setting that limits the speed, press F3 (SPD).

To change the setting that limits step operation and automatic operation, press F4 (next) and then press F1 (RUN).

To change the setting for the hold-to-run func- tion, press F4 (next) and then press F2 (HtoR).

6)The current setting for the selected item ap- pears.

To change the setting, enter the data with the number key and then press .

[SYS-SAFE-SVCE] select menu

1SET 2DEV 3SPD 4next

[SYS-SAFE-SVCE-DEV] data = 0

PB only

OTHER OPERATIONS

10-11