Yamaha SRCP manual Saving the parameter data onto the flash ROM, From-Save

10-8 Using the internal flash ROM

10-8-1 Saving the parameter data onto the flash ROM

n NOTE

The internal flash ROM can be used when the SRCP controller version is 24.10 or later and the TPB version is

12.51or later.

1)On the initial screen, press F3 (SYS).

10

OTHER OPERATIONS

2) Next, press F2 (B.UP).

3) Press F2 (FROM).

4)The ID number and auto load function setting in the flash ROM appear on the screen.

Press F1 (SAVE) here.

5)Press the emergency stop button on the TPB.

6)A confirmation message appears if data is stored in the flash ROM.

To initialize the flash ROM, press F1 (yes). To cancel, press F2 (no).

[MENU] select menu

1EDIT2OPRT3SYS 4MON

[SYS] select menu

1PRM 2B.UP3INIT 4next

[SYS-B.UP] select menu

1CARD2FROM

[SYS-B.UP-FROM] FROM : 04.03.01 auto load : Invalid 1SAVE2LOAD3INIT

[FROM-SAVE] press EMG.button

[FROM-SAVE]

data is saved on FROM initialize OK? 1yes 2no

7)Set an ID number for the data to be saved. Using the number keys, the "-" (minus sign)

key and the "." (period) key, enter a number of up to 9 characters and then press .

[FROM-SAVE]

make identification ID=_

effective key [0→9-.]

10-24