Yamaha SRCP manual Basic Key Operation, Basic Operation of the TPB

4-2 Basic Key Operation

4-2 Basic Key Operation

4

BASIC OPERATION OF THE TPB

1)Selectable menu items are displayed on the 4th line (bottom line) of the TPB screen.

Example A is the initial screen that allows you to select the following modes.

1EDIT

2OPRT

3SYS

4MON

The number to the left of each mode corre- sponds to the function keys from F1 to F4 .

2)On the initial screen shown in A, pressing a

function key moves to a lower level in the menu hierarchy. (A→B→C→D)

To return to the previous screen or menu level, press the ESC key. (See "4-4 Hierarchical Menu Structure" in this chapter.)

A

[MENU] select menu

1EDIT2OPRT3SYS 4MON

B ↓ F2 ↑ ESC

[OPRT] select menu

1ORG 2STEP3AUTO

C ↓ F2 ↑ ESC

[OPRT-STEP] 100 0: 0

001:MOVA 254,100

[ 0.00]

1SPD 2RSET3CHG 4next

4-4

3)If an error occurs during operation, a buzzer sounds for approximately 1 second and an er- ror message like that shown in Example E ap- pears on the 3rd line of the screen. If this hap- pens, check the contents of the error message and then press the ESC key. The error mes- sage will be cleared to allow continuing opera- tion. To correct the error, refer to the message tables in Chapter 12.

4)If an alarm occurs during operation, its alarm message appears on the 3rd line of the screen and a buzzer keeps sounding. The TPB cannot be used in this state. Turn off the power to the controller and then correct the problem by re- ferring to "13-2 Alarm and Countermeasures".

D ↓ F3 ↑ ESC

[OPRT-STEP] 100 0: 0

PGM No = _

(program No) 0→99

E

[OPRT-STEP]

32:origin incomplete