Agilent Technologies E8285A manual Fields, Abort Print, Access annunciator

Chapter 4, Description of Fields

Fields

Fields

Abort Print

Select this field to interrupt the print in progress.

GPIB Example

Abort Print is not directly programmable over the GPIB.”

Screens Where Field is Present

PRINT CONFIGURE

Access (annunciator)

When lit, the Access annunciator indicates the Test Set is signaling the mobile station with command information on the forward voice channel. This is a transitory state.

The state of the Access annunciator is reflected in the Call Processing Status

Register Group Condition Register bit 4.

See “Call Processing Status Register Group” in the Status Reporting chapter of the Agilent Technologies E8285A User’s Guide for further information.

The Test Set’s speaker is turned off when in the access state. This is done to eliminate any possible audio feedback which may occur if the mobile station’s microphone is open.

GPIB Example

“DISP CCNT;STATus:CDMA:CALLP:COND?”

queries the analog Call Processing event register. Bit four will be true (1) when an analog call is in the Access state. Also, the Access annunciator on the CALL CON- TROL screen is lit when an analog call is in the Access state.

Screens Where Field is Present

CALL CONTROL

CALL DATA

CALL BIT

148

S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp