Agilent Technologies E8285A manual Rgstr SID, Rssi Thresh

Chapter 4, Description of Fields

Fields

Rgstr SID

This field allows entry of the cell site’s alternate system identification (SID), used only for registration.

GPIB Example

“DISP CCON;CDMA:CELL:CONFigure:RSID 0“

sets the register network identification of the simulated CDMA cell site to 0.

Operating Considerations

The Test Set will send the Rgstr NID and Rgstr SID during the registration process (when the Register field is selected) in an attempt to cause a zone-based registration to occur. Immediately following the zone-based registration, another registration is performed using the NID and SID in the Network ID and System ID fields. The latter values will determine if the mobile station is roaming.

Screens Where Field is Present

CDMA CELL SITE CONFIGURATION

RSSI Thresh

This field is displayed only for NAMPS system type.

This field is used to set the received signal strength threshold of the mobile station. Exceeding the RSSI threshold and BER threshold causes the mobile station to send an MRI message to the base station reporting it’s current RSSI and BER.

The :RSETting command is used to control this field.

The query form (that is, :RSETting?) can be used to query the current field value.

Syntax

:RSETting <‘><choice><’>

:RSETting?

Example

OUTPUT 714;"CALLP:AMPS:RSET ‘Imm Resp’"

OUTPUT 714;"CALLP:AMPS:RSET?"

ENTER 714;Stol_set$

372

S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp