Agilent Technologies E8285A manual RF Anl Freq Cdma Swept Power Measurement, RF Channel analog

Chapter 4, Description of Fields

Fields

RF Anl Freq (CDMA Swept Power Measurement)

This field allows the user to set the frequency of the Test Set RF analyzer.

GPIB Example

“RFANalyzer?FREQuency 836.520000“

selects the RF analyzer frequency.

Operating Considerations

This field appears on the screen when the RF Display field on the CONFIGURE screen is set to Freq. The setting re-tunes the Test Set RF analyzer to the selected frequency.

Screens Where Field is Present

CDMA SWEPT POWER MEASUREMENT (When the Controls field is set to Auxiliary)

RF Channel (analog)

The RF Channel field is displayed on the screens listed below when the RF

Display field on the CONFIGURE screen is set to Chan.

This field displays the current channel number. Channel tuning eliminates the need to transmit and receive frequencies directly into the Test Set. Once the radio’s RF channel standard is selected, you only have to enter the channel number to automatically set the RF Generator and RF Analyzer to the correct frequency.

Operating Considerations

To utilize the correct transmit and receive frequencies select the appropriate channel standard from the RF Chan Std field on the CONFIGURE screen.

Screens Where Field is Present

TX TEST

RF ANALYZER

SPECTRUM ANALYZER (When the Controls field is set to RF Gen)

363