Agilent Technologies E8285A HLIMitEXCeeded? and LLIMitEXCeeded? commands to detect if a, Yes

Chapter 1, Description of Keys

Keys

To Query the High and Low Measurement Limit Settings. Use the :HLIMit:VALue? and :LLIMit:VALue? commands to query the high and low measurement limit settings.

		Syntax
		:HLIMit:VALue?
		:LLIMit:VALue?
		Example
		OUTPUT 714;"MEAS:AFR:FM:HLIM:VAL?"
		ENTER 714;High_limit
		OUTPUT 714;"MEAS:AFR:FM:LLIM:VAL?"
		ENTER 714;Low_limit
		This queries the high and low measurement limits for the AF Analyzer FM
		deviation measurement.
NOTE:	When querying measurement limits through GPIB, the Test Set always returns numeric values
	in attribute units, regardless of the current display units or GPIB units settings. Numeric values
	are expressed in scientific notation.
	Refer to “To Specify Units-of-Measure for GPIB Data Transfer” in the Operating Overview
	chapter of the E8285A User’s Guide .
		To Detect If a Measurement Limit Has Been Exceeded. Use the
		:HLIMit:EXCeeded? and :LLIMit:EXCeeded? commands to detect if a
		measurement limit has been exceeded. The returned value is either: 0 (NO) or 1
		(YES).
		Syntax
		:HLIMit:EXCeeded?
		:LLIMit:EXCeeded?
		Example
		OUTPUT 714;"MEAS:AFR:FM:HLIM:EXC?"
		ENTER 714;Hi_limit_exced ! 1= YES, 0 = NO
		OUTPUT 714;"MEAS:AFR:FM:LLIM:EXC?"
		ENTER 714;Lo_limit_exced ! 1= YES, 0 = NO
		This determines if the high or low measurement limits for the AF Analyzer FM de-
		viation measurement have been exceeded.

43