Agilent Technologies E8285A manual Register, Release, Programming Save

Chapter 1, Description of Keys

Keys

Register

This key causes the mobile station to perform a CDMA zone-based registration. See "Register (CDMA)" on page 358.

Release

This key is used to delete the assignment of the User Keys, K1 through K5, and K1’ through K3’. Press and release the Shift key, then the K5 key to select the Release function.

GPIB Example

No equivalent GPIB command

See Also

“Using USER Keys” in the Operating Overview chapter of the E8285A User’s Guide

IBASIC User’s Handbook to assign IBASIC commands to User Keys

Save

Press and release the Shift key, then the Recall key to access the save function.

This stores instrument setups.

Programming Save

The GPIB commands :REGister:SAVE are used to select this function programmatically. The save recall mass storage device is selected using the Save/Recall field on the I/O CONFIGURE screen.

Example

OUTPUT 714;"REG:SAVE ’SETUP1’"

This saves the instrument state to a file named SETUP1:

Removing Saved Instrument States. One or all of the saved instrument states can be removed from the selected save/recall mass storage device. The save/recall mass storage device is selected using the Save/Recall field on the I/O CONFIGURE screen. The GPIB commands :REGister:CLEar are used to perform this function programmatically.

54

S:\agilent\e8285\REFGUIDE\MANUAL\keys.chp