Agilent Technologies E8285A manual Frequency, Increment value from 10 MHz to 1 MHz

Chapter 1, Description of Keys

Keys

NOTE:	When querying a field setting through GPIB, the Test Set always returns numeric values in
	GPIB units or attribute units, regardless of the field’s current display units setting. Numeric
	values are expressed in scientific notation.
	Refer to “To Specify Units-of-Measure for GPIB Data Transfer” in the Operating Overview
	chapter of the E8285A User’s Guide .
		To Query the Increment Value Display Units. Use the :INCRement:DUNits?
		commands to query the units-of-measure used to display the increment value.
		Refer to “ To Specify Units-of-Measure for CRT Display” in the Operating Overview
		chapter of the E8285A User’s Guide for description of display units.
		Syntax
		:INCRement:DUNits?
		Example
		OUTPUT 714;"RFG:FREQ:INCR:DUN?"
		ENTER 714;Disp_unit$
		This queries the increment value’s display units for the RF Generator’s
		frequency.
		Programming Increment÷10
		Syntax
		:INCRement:DIVide
NOTE:	Integer-only fields (such as Intensity and Print Adrs) have a fixed increment of 1, and
	cannot be changed.
		Example
		OUTPUT 714;"RFG:FREQ:INCR:DIV"
		If the RF Generator’s frequency increment is 10 MHz, this command reduces the
		increment value from 10 MHz to 1 MHz.

38

S:\agilent\e8285\REFGUIDE\MANUAL\keys.chp