Agilent Technologies E8285A manual Keys, Address, Answer, This sets the Test Set’s Gpib address to

Chapter 1, Description of Keys

Keys

Keys

Address

Press and release the Shift key, then the Local key to display the GPIB address of the Test Set. There is no equivalent GPIB command for the Address key

Programming Address

The Test Set’s GPIB address can be changed through GPIB by using the :CONFigure:BADDress commands. If the Test Set’s GPIB address is changed programmatically, all future GPIB commands must use the new address.

Example

OUTPUT 714;"CONF:BADD 15"

This sets the Test Set’s GPIB address to 15.

The Test Set’s GPIB address can be queried through GPIB by using the :CONFigure:BADDress? commands.

Example

OUTPUT 714;"CONF:BADD?"

ENTER 714;Address

This queries the Test Set’s GPIB address.

See Also

"I/O Configure Screen" on page 119

Answer

This key functions only when Answer Mode is set to Manual.

Pressing this key answers CDMA-mode mobile-station-originated calls by removing the ring back tone from the mobile station’s audio path and allowing user conversation or other traffic to be exchanged.

The Test Set will automatically answer calls if Answer Mode is set to Auto.

GPIB Example

“DISP CCNT;CDMA:CALL:ANSW”

31