Agilent Technologies E8285A manual Shift

Chapter 1, Description of Keys

Keys

NOTE:	The :REGister:CLEar:ALL command is only valid for the internal save/recall mass storage
	device. To clear all saved instrument states from the Card, RAM, or Disk save/recall mass
	storage devices, each file must be removed individually using the :REGister:CLEar ’<file
	name>’ command.

Example

OUTPUT 714;"REG:CLE ’SETUP2’"

This clears the instrument state SETUP2 from the selected save/recall mass storage device.

Example

OUTPUT 714;"REG:CLE:ALL"

This clears all saved instrument states from the internal save/recall mass storage device.

See Also

“Saving and Recalling Instrument Setups” in the Operating Overview chapter of the E8285A User’s Guide

“Measurement Triggering Process” in the Operating Overview chapter of the E8285A User’s Guide

“*SAV (Save Instrument State)” in the GPIB Common Commands chapter of the E8285A Condensed Programming Reference Guide

“*RCL (Recall Instrument State)” in the GPIB Common Commands chapter of the E8285A Condensed Programming Reference Guide

Shift

Shift is used to selected the blue-labeled functions listed above some keys (such as Printer, Config, Release, EEX, and so forth).

GPIB Example

No equivalent GPIB command

55