Agilent Technologies E8285A manual VC Order, Syntax

Chapter 4, Description of Fields

Fields

VC Order

This field is used to send an order on the forward voice channel to the Mobile Station with authentication active. The VC Order field is only visible when authentication is activated and the mobile is assigned a voice channel.

The orders available are:

Change Power to Power Level 0 - 7

Maintenance (put the mobile station in maintenance mode)

Alert (alert the mobile station)

SSD Update (shared secret data update)

Uniq Ch (unique challenge)

The :VCORder command is used to send an order type mobile station control message to the mobile station. The Access annunciator will light momentarily while the Test Set is sending the mobile station control message.

A mobile station must be actively connected on a voice channel to the Test Set (that is, the Connect annunciator is lit) before attempting to send an voice channel order to a mobile station.

The query form of the command (that is, :VCORder?) can be used to determine the last order sent to the mobile station using the :VCORDer command.

Syntax

:VCORder <’><order message><’>

:VCORder?

Example

OUTPUT 714;"CPR:AMPS:AUTH:VCOR ’CHNG PL 0’"

OUTPUT 714;"CPR:AMPS:AUTH:VCOR?"

ENTER 714;Last_ord_sent$

Screens Where Field is Present

CALL CONTROL

444

S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp