Agilent Technologies E8285A manual Clr Scr, Cmax, Tests Ibasic Controller

Chapter 4, Description of Fields

Fields

Screens Where Field is Present

CDMA TRANSMITTER POWER RANGE TEST

Clr Scr

This field is used to clear the IBASIC controller screen.

Screens Where Field is Present

TESTS (IBASIC Controller)

CMAX

The CMAX field sets the number of access channels in the system. This will determine how many channels must be scanned by the mobile station when trying to access the Test Set. The value of this field will affect the time required for the mobile station to connect with the Test Set.

The :CMAXimum command is used to control this field.

The CMAX field is an immediate action field. That is, whenever the :CMAXimum command is sent, the change is reflected immediately in the appropriate signaling message(s) being sent on the forward control channel. No change occurs to the current state (i.e. Active, Register, Page, Access, Connect) of the Call Processing Subsystem.

The query form of the command (that is, :CMAXimum?) can be used to determine the current control channel setting.

Syntax

:CMAXimum <integer number>

:CMAXimum?

Example

OUTPUT 714;"CALLP:CMAX 21"

OUTPUT 714;"CALLP:CMAX?"

ENTER 714;Num_acc_chans

Screens Where Field is Present

CALL CONFIGURE

204

S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp