Manuals / Agilent Technologies / Video Game / Video Games

Agilent Technologies E8285A manual Ms Fer, Protocol field on

Models: E8285A

1 464

Download 464 pages 57.8 Kb

Page 307

Chapter 4, Description of Fields

Fields

•Pwr Step - MIN_PWR_CNTL_STEP. Minimum closed loop power control step size supported by mobile station. Possible values are: 1 dB, 0.5 dB, or 0.25 dB (message parameters 0, 1, 2 respectively). Displayed when TIA/EIA-95B is selected in the

"Protocol" field on page 346

•Called Num - The number dialed on the mobile station handset during the last mobile station originated call.

•*Clr All* - Selecting this Choice clears all MSDatabase values, allowing verification that information currently displayed is not from a previous registration.

GPIB Example

“DISP CCNT;CDMA:MOBile:DAT ‘ESN’;:CDMA:MOBile:DAT:VALue?“

sets the desired indicator to “ESN” and returns the 4-digit value for ESN.

Operating Considerations

These indicators are updated each time a mobile registration occurs.

The database is cleared whenever the protocol is changed. (See "Protocol" field on page 346 for more information about changing protocol.)

Screens Where Field is Present

CDMA CALL CONTROL

CDMA SHORT MESSAGE SERVICE

CDMA AUTHENTICATION

MS FER

This field displays the mobile station’s reported FER (frame error rate). The number displayed is a ratio of bad frames to total frames.

The mobile station can be commanded through the Test Set to change its periodic FER reporting intervals through the MS FER Report Interval field.

GPIB Example

“DISP CFER;CDMA:MOBile:FER?“

returns integer value of mobile station reported FER percentage.

See Also

MS FER Report Interval field description, on page 308 by # errors field description, on page 187

by # frames field description, on page 188

Screens Where Field is Present

CDMA MOBILE REPORTED FER

307

Image 307

Agilent Technologies E8285A manual Ms Fer, Protocol field on

Contents

Reference Guide Copyright License under the clause at Dfars 52.227-7013 APR Herstellerbescheinigung Manufacturer’s DeclarationGeneral Safety Considerations for this Instrument Product Markings E8285A Cdma Mobile Station Test Set Duration of Warranty 1 year\agilent\e8285\REFGUIDE\MANUAL\frntmt.fb Declaration of Conformity Agilent Technologies E8285A Support Contacts Regional Sales and Service Offices Technologies E8285A TestingTesting and for analog testing This BookDocumentation Map Instrument Basic User’s Handbook E2083-90000 Specifications 5968-8839EContents 101 100102 108 104105 106148 144Cmax Dsat ESN Contents MS FER Rand Randu SID MSB System ID 418 System Type Call Control Contents Keys are listed in alphabetical order Description of KeysAgilent Technologies E8285A Front Panel This sets the Test Set’s Gpib address to KeysAddress AnswerProgramming Average AssignAverage See AlsoOutput 714MEASAFRDISTNAVERSTAT on Call/Page CancelEEX Hold Ibasic resetEnd/Release EnterThis queries the increment value for the RF Gen Freq field Increment ÷10, Increment set, IncrementProgramming Increment set Output 714RFGFREQINCRMODE LOG Increment value from 10 MHz to 1 MHz FrequencyProgramming Increment÷10 Programming Increment ×10 K1 K5, & K1’- K3’Cannot be changed Programming Local Puts the device at address 14 in local modeLocal Low limit, High limitOutput 714MEASAFRDISTNHLIMSTAT? Used to display the high and low measurement limit values Analyzer FM deviation measurementDeviation measurement To Detect If a Measurement Limit Has Been Exceeded. Use HLIMitEXCeeded? and LLIMitEXCeeded? commands to detect if aYES Viation measurement have been exceededThis resets all of the active measurements in the Test Set Meas resetProgramming Meas reset Programming Meter MeterTo Turn the Meter on and OFF To Set the Number of Intervals on the Meter To Query the State of the MeterTo Query the Number of Intervals on the Meter To Set the Meter High End and Low End Points Endpoint to 10 watts for the TX power measurementMeter for the TX power measurement Graph meter high endpoint and low endpointTo Set the Meter High End and Low End Point Display Units Graph meter for the TX power measurement to dBmTo Query the Meter High End and Low End Point Display Units On/Off PowerPreset No Ratio WRecall This recalls the instrument state saved in the file SETUP1See Also Print Configure Screen on PrintProgramming Ref set Ref setSet a measurement reference point Commands to query a measurement reference pointMeasurement to dBm Save This saves the instrument state to a file named SETUP1Register ReleaseShift To 9, decimal point ., +/-, and a to F Yes On/OffE8285A User’s Guide Symbol KeysBackspace Down-Arrow, Up-ArrowUnits-of-Measure Keys Front Panel Knobs Miscellaneous HardwareCursor Control Knob Key Name Screen Displayed Gpib Example Programmable Front-Panel Keys for ScreensNon-Programmable Front-Panel Keys and Functions Data Functions Keys Guidelines for Using Measurement Data FunctionsGuidelines for Using Numeric Entry Field Data Functions User Keys Connectors are listed in alphabetical order Description of ConnectorsAgilent Technologies E8285A Rear Panel Description of ConnectorsAntenna ConnectorsOperating Considerations Audio in LOW, High See Also Scope To field description, on Audio output is used to output signals from AF Generators 1Audio OUT AUD Monitor OutputCell SITE/TRIGGERS Composite Video Cdma Clock MUX OutputEven SEC Input Duplex OUTSee Also Cdma Clock MUX Output field description, on Gpib EXT REF InputSee Also Gpib Adrs field description, on Modulation Input Pin assignments for this connector are as followsPaging Channel Logging DCS2 Protocol Serial Parallel PortSA Trig Output RF IN/OUTSerial Port Serial Port 16X Chip Output Traffic Channel Logging DCS1See Also Cell SITE/TRIGGERS on See Also EXT REF Input on MHz OutputThese screens are listed in alphabetical order Description of ScreensAdjacent Channel Power Screen Adjacent Channel Power ScreenHow the Test Set Measures Adjacent Channel Power ACP AF Analyzer Screen AF Analyzer Block Diagram onAF Analyzer Screen AF Analyzer Functional Block Diagram AF Analyzer Block DiagramCall Control Screen Call Control ScreensAnalog Meas Screen Call Control Screens Analog MeasHow To Program The Analog Meas Screen Requirements for Using The Analog Meas ScreenAuthentication Screen Call Control Screens AuthenticationCall BIT Screen Call Control Screens Call BITGeneral Syntax Using the Call BIT ScreenExample of Querying a Single Field Call BIT Screen Signaling Message NamesExample Printout General Syntax’ Printed Test Set Response MessageExample of Modifying Multiple Fields With One Output Call Configure Screen Call Control Screens Call ConfigureCall Data Screen Call Control Screens Call DataMessages which can be viewed are Aword Reading the Call Data Screen Message FieldsQuerying Multiple Fields With Single OUTPUT/ENTER Querying a Single Field Example of Querying a Single FieldCdma Authentication Screen Cdma Authentication ScreenCdma Call Control Screen Cdma Call Control ScreenCdma Cell Site Configuration Screen Cdma Cell Site Configuration ScreenCdma Cellular Mobile Receiver Test Screen Cdma Cellular Mobile Receiver Block Diagram onCdma Cellular Mobile Receiver Test Screen OUT Cdma Cellular Mobile Receiver Block DiagramCdma Cellular Mobile Transmitter Test Screen Cdma Cellular Mobile Transmitter Test ScreenCdma Gated Power Screen Cdma Gated Power ScreenCdma Generator Control Screen Cdma Generator Control Block Diagram onCdma Generator Control Screen Lator Cdma Generator Control Block DiagramCdma Mobile Reported FER Screen Cdma Mobile Reported FER ScreenCdma Mobile Reported Pilot Strength Screen Cdma Mobile Reported Pilot Strength ScreenCdma Open Loop Time Response Order Screen Cdma Open Loop Time Response ScreenCdma Reverse Channel Spectrum Screen Cdma Reverse Channel Spectrum ScreenCdma Short Message Service Screen Cdma Short Message Service ScreenCdma Swept Power Measurement Screen Cdma Swept Power Measurement ScreenCdma Transmitter Power Range Screen Cdma Transmitter Power Range Test ScreenConfigure Screen Configure ScreenDuplex Test Screen Duplex Test Block Diagram onDuplex Test Screen Duplex Test Functional Block Diagram Duplex Test Block DiagramHelp Screens I/O Configure Screen Message Screen Oscilloscope Screen and Menus Oscilloscope ScreensUsing the Scope To Field Oscilloscope Input IndicatorSelecting the Oscilloscope’s Input Printer Configurations Screen Print Configure ScreenRF Analyzer Screen RF Analyzer Block Diagram onRF Analyzer Screen RF Analyzer Functional Block diagram RF Analyzer Block DiagramRF Generator Screen RF Generator Block Diagram onRF Generator Screen 2II RF Generator Functional Block DiagramRX Test Screen RX Test Block Diagram onRX Test Screen RX Test Fields and Their Functions RX Test Block DiagramSelect Service from the To Screen menu Service ScreenSpectrum Analyzer Screen and Menus Menus are accessed using the Controls fieldTo access the functions without having to change menus Spectrum Analyzer ScreensSetting Resolution Bandwidth and Sweep Rate Using the Spectrum AnalyzerAutomatic Calibration Description of the Tests Subsystem Tests ScreensTests Main Menu Screen Tests Main Menu Or SET UP Test SET listsThis screen displays the channel frequencies to be tested Tests Channel InformationTests Channel Information Screen Tests Test Parameters Screen Tests Test ParametersTests Order of Tests Screen Tests Order of TestsTests Pass/Fail Limits Screen Tests Pass/Fail LimitsTests Save/Delete Procedure Screen Tests Save/Delete ProcedureTests Execution Conditions Screen Tests Executions ConditionsTests External Devices Screen Tests External DevicesTests Printer Setup screen determines how tests are run Tests Printer SetupTests Printer Setup Screen Tests Ibasic Controller Screen Tests Ibasic ControllerTX Test Screen TX Test Block Diagram onTX Test Screen TX Test Functional Block Diagram TX Test Block Diagram146 Field descriptions are listed in alphabetical order Description of FieldsAbort Print Access annunciatorScreens Where Field is Present FieldsAcc Prb Pwr Avg PowerSelects the Access Probe Power measurement Acc Prb Pwr150 AC Level Access Probe annunciatorActive Base station is not active Active annunciatorACP Meas Turned onTests External Devices Add IntcptAddr Enters 8 in the Add Intcpt fieldAF Cnt Gate AF AnlAF Freq AFGen1 Lvl AFGen1 FreqAFGen2 Freq AFGen1 ToThis field has two fields AFGen2 To Entering an Akey Directly into the Test Set AKeyGenerating a New Akey Enters a 1 preceded by 19 0’s in the A-Key field Key DigitsSets the Alert parameter to On AlertAll Chans? This field sets the Alert parameter in SMS messagesSelects All Bands in the Alt Pwr Ms Cal Bands field Alt Pwr Ms Cal BandsQueries the Cdma amplitude error measurement result Ampl ErrorAM Depth Amplitude See Also Atten Hold on Screens Where Field is PresentSets the trigger amplitude Amplitude Cdma Swept Power MeasurementAnswer Mode Selects manual modeTriggers all active measurements Sets the remote operation trigger mode to SingleAntenna ArmDisarm field description, on Screens Where Field is Present Queries the Cdma gated power attack timeAttack Time Atten Hold This field sets the Audio in LO connector’s stateAudio In Lo Authen Turns Authentication OnAuthentication Tests, E8285A Application Guide Audio OutAuthen Data Clear Authentication Data TableClears the Authentication Data Table Queries the Cdma Authentication Data TableData Position Numeric Value Reading the Authentication Data Table over Gpib173 END Select Programming Example for Authentication Data Table175 Auto/Norm AuthentThis field specifies how the trigger level is set Auto Zero Autostart Test Procedure on Power-UpTests Execution Conditions Operating Considerations for the Average Power Measurement Avg PowerAverages Queries the average power measurement Selects the average power measurementZeroes the average power measurement See Also Chan Power on Sets the Awgn generator’s level to −75 dBm AwgnSets the Bandclass parameter to Band ClassIf Bandclass 1 or 4 is selected Base Freq User Defined Base Frequency is calculated using the following formulaBeeper Base IDParameters Message from the Test Set BER Thresh Burst Time Queries the Cdma gated power burst timeRange of Values By # errorsThis field is coupled to the Span field’s setting BW=Called Number By # framesLimits call progress to the paging channel This field is used for measuring access probe power levelsCalling Name Call Limit360 Call StatusCdma Status Register Bit Definitions Registering annunciator onCarrier Ref CarrierQueries the carrier feedthrough measurement result Center Freq Analog CC OrderSets the center frequency to 850 MHz Selects n up power control stepsCenter Freq Cdma ChangeChan is divided into two fields ChanSets the Channel field to Channel Cdma to Analog or Interband HandoffsChannel BW Selects Channel Power measurements Chan PowerQueries the channel power measurement Operating Considerations for the Channel Power Measurement Chan Power Meas IntrvlSets the measurement interval to 1 ms Check Chan StdTests Pass/Fail Limits Register Cdma field on Timer Reg field onCheck Digits MS Database field onFor Ntacs systems, the choices are Ch LocSyntax and an example for Ntacs systems are as follows Chan Space User Defined Ch OffsetClosed Loop Pwr Cntl This field sets the power control modeSelects Open Loop power control mode Eventually dropped. See Drop Timer onTests Ibasic Controller Clr ScrCmax This field is used to clear the Ibasic controller screenCnfg External Devices CCHannel command is used to control this fieldCurrent control channel setting Cntl ChanSets the base station’s country code to Test Save/Delete ProcedureCntry Code Code LocationConfidence This field sets the confidence coefficient for FER testingSets a confidence coefficient of 95% Range of values floating point number 80 through Connect annunciator Swered When a call is terminated, this annunciator will go outConnected annunciator ContinueCont/Single Controls Cdma Gated PowerControls Cdma Reverse Channel Spectrum Select among the following Controls Cdma Swept Power MeasurementDefault selection is Main Controls Open Loop Time ResponseControls Spectrum Analyzer Controls OscilloscopeCurrent Data Length Data ModeSets the User Data field data format to hexadecimal Selects full-rate data transmission Data RateData Spec How to read the contents of the individual messagesSelects Prbs Data TypeDC Current DateDC Level Tests Channel Information De-Emp GainDe-Emphasis Delete ChTests Order of Tests, External Devices Delet InsDelet Stp DescriptionDetector Types DetectorDisplay DisarmStops a measurement in progress Setting the Display field to Data Call Control Screen Received Data Fields Information Strings Available From The Received Data Fields Information Strings Available from Reverse Voice Channel Information Strings Available When a Decoding Error OccursSetting the Display Field to Meas Call Control Screen with Meas Selected Call Control Screen with NMeas Selected Displays interim FER results Enables displays of user messagesDisplay Interim Results Display User MssgsDisplay Word On how to read the contents of the individual messagesNrvc Ord Display Word Choices AuthWORDBSChalOrd MRI OrdUniqChCon RVCBSChalRVC Ord RVCOrdCon235 Distn Enters 4 in the Drop Intcpt field Drop IntcptSee Also TDrop field description, on This field turns the call drop timer on or off Drop TimerTurns off the call drop timer Dsat Sets the Dsat field to 0 2556CB DSAT/DST hexDsat Meas Call Control when Namps is selected in the System Type fieldDuplicate User Data Duplex OutEnters 2 times in the Duplicate Entered Data field Queries the Eb/Nt field Echo DelayDelays your voice 2 seconds Eb/NtSelects the Octet format EncodingEnter Hex Data Enter Ascii DataErrors Enter Procedure FilenameTests Save/Delete Procedure Queries the FER errors measurement result Errors CountedEnables escape mode Esc ModeESN dec ESN ESN hexExecutes the handoff Execute HandoffExec Execution Cond Execute Closed Loop Power Control ChangeExpected Queries the expected PN Offset value for Sector a Expected PN OffsetExample Expected StrengthQueries the expected pilot strength value for Sector a Queries the Expected TAdd value calculated by the Test Set Expected TAddQueries the Expected TDrop value calculated by the Test Set Expected TDropExt Load R External Disk SpecificationSTD-008 Kor PCS Ext NghbField on Queries the currently displayed FER measurement result FERFF at End Clears the Errors Reported and Frames Reported fieldsFER Report Clear FER SpecFilter FF at StartFlow Cntl FirmwareFM Coupling FM Deviation Call Control FM DeviationFrame Clock Frames Counted FramesQueries the FER frames measurement result Freq Channel Information Freq Error CdmaSelects frequency error from the list of choices Queries the Cdma frequency error measurement resultDisplays the Freq Error measurement field Freq Error AnalogCall Control when Meas is selected in the Display field Frequency Analog Gain Cntl Gate TimeSee Also Num of Bits field on Grid Gen-AnlTurns off the display grid This field is used to initiate a handoff Grid Cdma Swept Power MeasurementHandoff Sets the grid to on or offExecutes a Cdma to Analog handoff Hard Handoff annunciatorIbasic Echo Gpib AdrsIbasic Ibasic Cntrl Queries the Ideal Mobile Power field Ideal Mobile PowerSets Initpwr to Init PowerIf Filter If Unit-Under-Test FailsInput Att Requires you to set the needed amount of input attenuation Ator hold modeInput Atten InformationInput Gain Input Port Insrt Ins Insert ChInst Echo Insrt StpInst# Keep InternalThis field selects the trigger source Queries the length of the current SMS message length LengthProgramming Example for Keep Field Lower and Upper ACP RatioLevel Level divLibrary Lines/PageLower Limit Lvl Cdma Gated PowerQueries the level at the current marker position Main Menu Lvl Open Loop Time ResponseQueries the amplitude at the marker’s present position Marker Lvl Cdma Swept Power MeasurementMarker Freq Queries the frequency at the marker’s present positionMarker Lvl Queries the difference in frequency between the two markers Marker Norm/DeltaMarker Time Selects Delta in this fieldPositions the marker at 0 microseconds Marker Time Cdma Gated PowerMarker Pos Cdma Reverse Channel Spectrum Positions the marker in the center of the displayPosition is settable in units of milliseconds Marker Time Cdma Swept Power MeasurementMarker Time Open Loop Time Response Positions the marker at 0 millisecondsMarker To Sets the maximum number of frames for FER measurements to Mask TypeMax Frames This field sets the maximum frame count for each FER testExecutes a Min/Max Power measurement Max PowerQueries the Max Power measurement value Sets the cycle to 2.56 seconds Max Req Seq, Max Rsp SeqMax Slot Cycle Index Sets both parameters toMeas Cntl Message Data ModeSets the measurement mode to single Cdma Gated Power unlabeledQueries the Min Power measurement value Min PowerMic Pre-Emp Min/Max Pwr Causes the Test Set to execute a Min/Max Power measurementIdentifies the mobile station parameter MUX1REV1 Mobile ParmSets the mobile station’s MUX1REV1 parameter value to Mobile Power Mode Mode Mobile PwrModel Mod In To Syntax for MS Id Field MS IdMS Ack Cause Code 304 MS Ack Rcvd annunciator Screens Where Annunciator is PresentMS Database Protocol field on MS FERMS ID MS FER Report IntervalSets the mobile station’s FER report interval to 160 frames Enters the mobile station’s phone number Enters the mobile station’s MIN numberOperating Considerations for MS ID Field Netwrk Code Network IDSets the base station’s network code to Nghb Fq Ch Sets Nompwrext to Nom PowerNom Pwr Ext Sets Nompwr toNo Pk/Avg Normalize Notch Gain Notch FreqSee Also Gate Time field on Notch CouplNum of Bits Buffer has a maximum capacitySets Numstep to Num PagesNum Step Sets the Num Pages field to twoSets the Ocns Walsh code to Ocns Sector a PowerOffset Freq Ocns Sector B PowerSets the Walsh code for the Ocns to Open Loop Time Response Execute Executes a time response to open loop power control testOptions Order Enters 1111111 in the Orig Addr field Orig AddrHolds the output attenuators Tests Printer Setup, Execution ConditionsOutput Atten Hold Output HeadingThis field selects the RF output port on the Test Set Tests Execution Conditions, Printer SetupOutput Port Output Results ForSyntax Example Output Results ToRate AnnunciatorSets the Page Rate field to full Specifies the messages to be sent SendSent annunciator Paging Sector a PowerSets Sector a pilot power to −16 dB See Also Call/Page on Screens Where Field is PresentSets Pamsz to Pam SizeParameter Parm Test ParametersPass Word ParityPhone Num PcmciaThis field provides re-formatting of Pcmcia cards Selects phase error from the list of choices Phs ErrorQueries the phase error measurement result Sets Sector B pilot power to −7 dB Pilot Sector a PowerPilot Sector B Power Sets Sector a pilot power to −7 dBSets the Pilot Inc field to Pilot IncPilot Meas Clear Clears the contents of the Cdma Mobile Reporting tablePk Det To PN Offset Status States Decimal Pilot Strength Level is above Programming ExamplePN Offset Sector B Power PN Offset Sector a PowerSets the pilot PN offset index to Position Port/SweepThis control performs two functions Power Cntl Step Size Operating Considerations, Power Zero Power MeasRefer to the Chan Power field description, on Refer to the Avg Power field description, on Gpib ExampleSets Pwrstep to Power StepThis field allows entry of the power increment Pwrstep Print AllPrinter Port Print Printer SetupPrint Data Destination Printer AddressSets the Priority parameter to Urgent PrioritySets the Privacy parameter to Restricted Procedure LibraryProc Save/Delete Procedure PrivacyThis field provides a choice of these protocol selections Setting up a Call chapter in the E8285A Application GuideProgram ProtocolSets the Pwr Level Vmac field to Enables or disables power down registrationPwr Dwn Reg Pwr LevelRight-Hand Field Pwr LvlPwr Lvl field is divided into two fields Left-Hand FieldPwr Up Reg Randa RandQueries the Rand field Queries the Randssd field See Also SSD Update field on Screens Where Field is PresentRandb RandssdRANDSSD2 RANDSSD1Randu RANDSSD3Range Hold See Also Uniq Chall field on Screens Where Field is PresentQueries the Randu field Rcv Pace Receive pace field is used when receiving serial dataReceived Sets the reference level high value Ref Level Cdma Swept Power MeasurementRef Level Sets the reference level to 0 dBmReg Period Sets the timer-based registration period toRegister Cdma Register AnalogCauses the mobile to register Register annunciator MS ID field description, on Screens Where Field is PresentRegistering annunciator Release Time Queries the Cdma gated power release timeRes BW ResetSelects the RF analyzer frequency RF Anl Freq Cdma Swept Power MeasurementSpectrum Analyzer When the Controls field is set to RF Gen RF Channel analogSelects channel RF Channel CdmaRF Chan Std Range MHz Numbers E8285A Generate E8285A Receive Mobile Test ChannelRF Display RF Cnt GateRF Gen Volts RF Gen FreqSets the RF generator to 815 MHz RF Level Offset RF Out RF OffsetQueries the RF Power level RF PowerRgstr NID Rssi Thresh Rgstr SIDRX/TX Cntl Sets the SAT field to 6000 Hz RunRun Test SATSAT field is divided into two fields TX Test Analog SAT DeviationSat Tol SCM Save/RecallScope To Sc PrioritySets the search priority level in the custom neighbor list Sctr a Pwr Sets Sector A’s power to −100 dBmTurns on Sector a Sctr B Pwr Select Procedure FilenameTests Save/Delete Procedure Tests Main Menu Select Procedure LocationSend Msg Send Word Send Msg Cdma Swept Power MeasurementSTD-008 Kor PCS TSB-74 Serial Baud SensitivityThis area performs two functions Serial No Serial9This field displays the serial number of the Test Set Set Message Choices Set MessageBSChalCon FVC V Mes FVCBSConFVC O Mes FVCUniqChMSMessOrd MS InVChRandChalB RandChalACall Bit Set Message Field Descriptions UniqChOrd391 OHD This field displays the overhead message type 393 Seqn Order of Tests SettlingSID MSB Sinad Slope Cdma Swept Power MeasurementSets the trigger slope SMS In Progress annunciator SMS Sent annunciatorSngl Step SNR Operation SNRThis field controls softer handoffs Softer HandoffBegins a softer handoff This field is used to enter the parameter Softslope Softer Handoff annunciatorSoft Slope Queries the Cdma condition registerSpeaker ALC SpanSets the frequency span to 3 MHz Spec Pass/Fail Limits Speaker VolSpec# Squelch Sets search-window a to Srch Win aSets search-window N to Srch Win NSSDA=0 annunciator Srch Win RSets search-window R to Ssda Ssdb Initiates the SSD Update procedure SSD UpdateAuthentication Tests, E8285A Application Guide Status Mobile Reported Pilot Strength SSD Update annunciatorProgramming example for Status Field Operating Considerations for Status Field Status Cdma Swept Power Measurement Zzzz new Status Cdma AuthenticationQueries for the arming status of the measurement Steps 251 Screens Where Field is PresentStep Size Stop Length Step#Programming Example for Strength Field StrengthArms the measurement Swept Pwr Cdma Swept Power MeasurementSync Sector a Power This field allows for arming the swept power measurementSystem Type Call Control System IDSystem Type CDMA-to-CDMA or CDMA-to-Analog Handoff All instances, the default is AmpsSelects the Amps system type for a Cdma to analog handoff Sets Tcomp to Operating Considerations TAddTComp Sets Tadd toThis field allows entry of the pilot drop threshold Tdrop TDropSets Tdrop to Sets Ttdrop to Handoff Drop Timer Expiration ValuesTTDrop Test NameTest Status Test Procedure Run ModeThis field is duplicated on the Cdma Call Control screen This annunciator is lit when a FER test is in progressMeasured FER is displayed as 0.6% Max Frames annunciator Measured FER is displayed as 1.4%Failed annunciator Example Failed FER measurementTimeBase Time ConfigureFrequency Accuracy Definition IS-98 Time/divTime Offset Queries the Cdma time offset measurement resultTime Offset Negative Timer RegQueries the current Rho measurement result TM Test Mode RhoTM Rho Selects Traffic Rho as the current Rho measurementTo Screen ConfigAnalog Clears the screen Trace Cdma Swept Power MeasurementTotal RAM This field clears the measurement from the displaySets the Walsh cover for Sector A’s traffic channel to Traffic Sector a PowerTraffic Sector B Power Sets Sector B’s pilot power to −16 dBSelects service option Traffic Data ModeTransmitting annunciator Traffic RhoTrig-Delay Tune Freq Transmitter Power measures RF power at the RF IN/OUT port TX Power438 TX Pwr Meas TX Pwr Zero Type Initiates a Unique Challenge-Response procedureUniq Chall Units Uniq Chall annunciatorEnters the Ascii string Call Home in the User Data field Selects Ascii data entry mode for the User Data fieldUpper Limit User Data Ascii or HexVC Order Vert Offset Vert/divSets Sector B’s traffic channel to Walsh code Walsh Sector aWalsh Sector B Sets Sector A’s traffic channel to Walsh codeXmt Pace Transmit pace field is used when transmitting serial data448 Numerics Index450 Index 451 452 Index 453 454 Index 455 456 Index 457 458 Index 459 460 Index 461 462 Index 463 464