Agilent Technologies E8285A manual Channel Cdma to Analog or Interband Handoffs

Chapter 4, Description of Fields

Fields

Channel (CDMA to Analog or Interband Handoffs)

This field allows entry of an analog voice channel for CDMA-to-analog handoffs, or a CDMA traffic channel for CDMA-to-CDMA hard handoffs.

GPIB Example

“CDMA:CALL:AHAN:CHAN 1”

sets the Channel field to 1.

Operating Considerations

•During a CDMA-to-analog handoff, the Test Set commands the mobile station to re- tune to this analog voice channel. A CDMA-to-analog handoff attempt will occur when AMPS is selected in the System Type field and the Execute field (see Execute (Handoff) field description, on page 250) is selected.

•During a CDMA-to-CDMA interband handoff, the Test Set passes control and connection of the mobile station from one band class to another (see the System

Type (CDMA-to-CDMA or CDMA-to-Analog Handoff) field description, on page 419). A CDMA-to-CDMA hard handoff attempt will occur when TIA/EIA- 95B is selected in the System Type field and the Execute field (see Execute (Handoff) field description, on page 250) on the CDMA Call Control screen is selected.

The range of values when TIA/EIA-95B is selected in the System Type field is shown in the following table.

Table 8	TIA/EIA-95B Range of Values
Destination Chan Std Selection		Channel Range	Default Channel
MS AMPS		1 to 799 or 990 to 1023	384
US PCS		1 to 1199	525
MS TACS		1 to 1000	384
MS JTACS		1 to 798	76
Japan CDMA		1 to 799, 801 to 1039, or 1041 to 1199	76
Kor PCS P0		0 to 1300	384
Kor PCS P1		1 to 1300	384

Screens Where Field is Present

CDMA CALL CONTROL

195