Agilent Technologies E8285A manual Marker Time Open Loop Time Response

Chapter 4, Description of Fields

Fields

Marker Time (Open Loop Time Response)

This field is displayed when the Controls field on the OPEN LOOP TIME RESPONSE screen is set to Display. This field sets the marker’s position in milliseconds, referenced to the time alignment of the step change in the Test Set’s output power.

GPIB Example

“CDMA:OLTR:MARKer:TIME 0“

positions the marker at 0 milliseconds.

“MEASure:OLTR:MARKer:LEVel?“

queries the power level of the last time response to open loop power control test at the current marker position.

Operating Considerations

The position is settable in units of milliseconds.

Screens Where Field is Present

OPEN LOOP TIME RESPONSE

Marker Time (CDMA Swept Power Measurement)

This field sets the position of the measurement marker on the display.

GPIB Example

“CDMA:SWEPtpower:MARKer:TIME ‘30.0’”

sets the marker position at 30 milliseconds.

Operating Considerations

Adjust the position of the marker on the display as appropriate. This field allows adjustment of the marker position over the full range of the trace, which is from 0.0 millisecond to 100 milliseconds. The default is 0.0 millisecond.

Screens Where Field is Present

CDMA SWEPT POWER MEASUREMENT (When the Controls field is set to Display)

290

S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp