Agilent Technologies E8285A manual SAT field is divided into two fields, Syntax

Chapter 4, Description of Fields

Fields

SAT:

The SAT: field is divided into two fields:

•The left-hand field displays the current SAT tone frequency assignment for the current voice channel being used by the Test Set and the mobile station.

The Sat field only displays a value when the system type is set to AMPS, TACS, JTACS or when NAMPS Ch Loc: is set to Wide. The Test Set must also be actively connected on a voice channel (that is, the Connect annunciator is lit). A “-” is dis- played if a mobile station is not actively connected on a voice channel or the system type is NAMPS and Ch Loc: is set to Lower, Middle, or Upper.

This is a read only field.

The :AVCSat? query command is used to query the contents of the left-hand subfield. There is no command form of the :AVCSat? command.

Syntax

:AVCSat?

Example

OUTPUT 714;"CALLP:AVCS?"

ENTER 714;Active_vc_sat$

•The right-hand field (highlighted field) is used to set the SAT Color Code (SCC) to be used on the designated voice channel (the channel number entered into the Chan: right-hand subfield).

The :SATone command is used to control the right-hand subfield.

The query form of the command (that is, :SATone?) can be used to determine the cur- rent SAT Color Code (SCC) setting.

Syntax

:SATone?

:SATone <’><5970HZ/6000HZ/6030HZ><’>

Example

OUTPUT 714;"CALLP:SAT?"

OUTPUT 714;"CALLP:SAT ’5970HZ’"

ENTER 714;Sat_color_code$

Screens Where Field is Present

CALL CONTROL

375