Agilent Technologies E8285A Amplitude, See Also Atten Hold on Screens Where Field is Present

Chapter 4, Description of Fields

Fields

Amplitude

This field sets the output power of the Test Sets’s transmitter (that is, the output power of the Test Set’s RF Generator). See “RF Generator” in the GPIB Command Syntax chapter of the E8285A Condensed Programming Reference Guide for programming command syntax.

The :AMPLitude command is used to control this field.

To query the current setting of the amplitude field use the :AMPLitude? command.

Syntax

:AMPLitude <real number> <units>

:AMPlitude?

Example

OUTPUT 714;"CALLP:AMPL -50 DBM"

OUTPUT 714;"CALLP:AMPL?"

ENTER 714;Ampl_val$

Operating Considerations

This is a priority control field. Accessing the RX TEST or TX TEST screen overrides any changes made to this field in other screens.

If a microphone is connected, and the amplitude is set to Off, keying the microphone causes the amplitude to turn on to its previous level until the microphone is no longer keyed.

See Also

"Atten Hold" on page 169

Screens Where Field is Present

DUPLEX TEST

RF ANALYZER

RF GENERATOR

RX TEST

SPECTRUM ANALYZER

CALL CONTROL

ANALOG MEAS

165