Agilent Technologies E8285A manual Ssdb

Chapter 4, Description of Fields

Fields

SSDB

The :SSDB command is only available through the remote users interface. No field is displayed for this function on the test set. The user can enter a valid value into the Test Set along with other necessary shared secret data to avoid the SSD Upd process at the start of testing to reduce testing time.

SSDB is the least significant 64-bits of the SSD value stored in the mobile station. SSDB is entered as a 16-digit hexadecimal value.

The :SSDB command is used to control this field.

The query form (that is, :SSDB?) can be used to query the current Test Set value.

Syntax

:SSDB <‘><16 character hex value><‘>

:SSDB?

Example

OUTPUT 714;"CALLP:AMPS:AUTH:SSDB ‘1234567890ABCDEF’"

OUTPUT 714;"CALLP:AMPS:AUTH:SSDB?"

ENTER 714;Ssdb_val$

The :SSDB:NEW command is only available through the remote users interface. No field is displayed for this function on the test set. This value can be used during authentication to replace or query the SSD-A_NEW value in the Test Set.

The :SSDB:NEW value is the least significant 64-bits of the SSD value stored in the mobile station. SSDA:NEW is entered as a 16-digit hexadecimal value.

The query form (that is, :NEW?) can be used to query the current Test Set value.

Syntax

:NEW <‘><16 character hex value><‘>

:NEW?

Example

OUTPUT 714;"CALLP:AMPS:AUTH:SSDB:NEW ‘1234567890ABCDEF’"

OUTPUT 714;"CALLP:AMPS:AUTH:SSDB:NEW?"

ENTER 714;Ssdb_new_val$

408

S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp