Agilent Technologies E8285A manual Insert Ch, Insrt Ins

Chapter 4, Description of Fields

Fields

Insert Ch

		This field allows you to enter a new channel in frequency table at the bottom of
		the screen.
		Operating Considerations
		You are required to specify if the test channel is a prime test channel. Prime test
		channels are the radio channels primarily used by the radio operator; they are the
		channels you are the most concerned about testing.
		Use the RX Chan Info or TX Chan Info fields if the channel requires a tone
		code or frequency for testing radios that have CTCSS (Continuous Tone-
		Controlled Squelch System) squelch.
		For example, if your radio uses a CTCSS tone of 91.5 Hz, you could enter the tone
		frequency in both RX and TX channel information fields as CT FR91.5 or you
		could enter the tone code itself as CT ZZ.
		When testing cellular radios, the Channel Information is the channel number you
		are testing (don’t confuse this with the Chan# field used to list channels on this
		screen).
NOTE:	Enter −1 in the RX and TX test frequency fields to have all subsequent channels ignored when
	testing is started.
		Screens Where Field is Present
		TESTS (Channel Information)

Insrt Ins

This field allows you to enter an instrument in the list at the bottom of the screen.

Use the knob, up-arrow, or down-arrow key to select the step where you want to insert an instrument.

Screens Where Field is Present

TESTS (External Devices)

279