Agilent Technologies E8285A manual Output 714MEASAFRDISTNAVERSTAT on

Chapter 1, Description of Keys

Keys

To Turn Measurement Averaging ON and OFF. Use the :AVERage:STATe commands to turn the averaging data function ON and OFF.

Syntax

:AVERage:STATe ON

:AVERage:STATe OFF

Example

OUTPUT 714;"MEAS:AFR:DISTN:AVER:STAT ON"

This turns the Average data function ON for the AF Analyzer distortion measurement.

To Query the Measurement Averaging State. Use the :AVERage:STAT? commands to query the current state of the averaging data function. The returned value is either: 0 (OFF) or 1 (ON).

Syntax

:AVERage:STAT?

Example

OUTPUT 714;"MEAS:AFR:DISTN:AVER:STAT?"

ENTER 714;State_on_off ! 1 = ON, 0 = OFF

This queries the state of the Average data function for the AF Analyzer distortion measurement.

To Reset Averaging. Use the :AVERage:RESet commands to restart the averaging algorithm used to calculate an averaged measurement.

Syntax

:AVERage:RESet

Example

OUTPUT 714;"MEAS:AFR:DISTN:AVER:RES"

This resets the Average Data Function for the AF Analyzer distortion measurement.

To Set the Number of Averages. Use the :AVERage:VALue commands to set the number of averages used by the averaging algorithm.

Syntax

:AVERage:VALue

Example

OUTPUT 714;"MEAS:AFR:DISTN:AVER:VAL 25"

This sets the number of averages to 25 for the Average data function for the AF Analyzer distortion measurement.

33