Agilent Technologies E8285A manual ESN hex, Esn

Chapter 4, Description of Fields

Fields

ESN (hex):

This field displays the electronic serial number (ESN), in hexadecimal form, received from the mobile station on the reverse control channel in response to a forward control channel message. The ESN (hex): field is displayed only when the Display field is set to Data and a reverse control channel message containing this information has been decoded.

Refer to the "Display" field on page 223 for information on how to read measurement results from this field.

Screens Where Field is Present

CALL CONTROL

ESN

This field is used to enter the electronic serial number (ESN) of the mobile station into the Test Set. There are two methods which can be used to enter the ESN. The serial number can be captured by the Test Set through a registration order, or the serial number can be entered as an 8-digit hexadecimal value directly into this field.

To capture the electronic serial number through a registration, see Register (Analog) field description, on page 358 for further information.

To enter the serial number directly use the :ESNumber command.

The query form of the command (that is, :ESNumber?) can be used to determine the current setting of the ESN field.

Syntax

:ESNumber <’><8 character hex value><’>

:ESNumber?

Example

OUTPUT 714;"CALLP:AMPS:AUTH:ESN ’12D4E678’"

OUTPUT 714:"CALLP:AMPS:AUTH:ESN?"

ENTER 714;Esn_val$

Screens Where Field is Present

AUTHENTICATION

249