Agilent Technologies E8285A manual Amplitude Cdma Swept Power Measurement, Answer Mode

Chapter 4, Description of Fields

Fields

Amplitude (CDMA Swept Power Measurement)

This field sets the measurement trigger amplitude.

GPIB Example

“CDMA:SWEPtpower:TRIGger:AMPLitude ‘-18 dB’”

sets the trigger amplitude.

Operating Considerations

Enter a value here that is sufficient to trigger the measurement. The selectable values are: −12 dB, −18 dB, and −24 dB. The default value is −12 dB.

Screens Where Field is Present

CDMA SWEPT POWER MEASUREMENT (When the Controls field is set to Trigger)

Answer Mode

This field determines whether the Test Set will require answering before conversation or exchange of other traffic can begin. Use of this field applies only to mobile station originated calls

•Auto - a mobile station originated call will automatically progress to the connected state. No ringback tone will be heard on the mobile station’s handset.

•Manual - the ANS key must be pressed to remove the ringback tone from the mobile station’s audio path and allow user conversation, or other traffic, to be sent.

GPIB Example

“DISP CCON;CDMA:CALL:ANSWer:MODE ‘MANUAL’”

selects manual mode.

“DISP CCON;CDMA:CALL:ANSWer”

answers a mobile station originated call.

Operating Considerations

Calls will connect faster when Answer Mode is set to Auto.

Screens Where Field is Present

CDMA CELL SITE CONFIGURATION

166

S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp