Agilent Technologies E8285A manual Cdma Clock MUX Output, Composite Video

Chapter 2, Description of Connectors

Connectors

CDMA CLOCK MUX OUTPUT

The CDMA frame clocks provide the CDMA timing references for generating and demodulating CDMA signals. The CDMA clock MUX output provides the following CDMA frame clocks on a multiplexed output.

1.25ms

20.00ms

26.67ms

80.00ms

2.00s

Each of these CDMA frame clocks is available by selecting from the list of choices displayed on the CONFIGURE screen.

Operating Considerations

•BNC

•Select which frame clock will be output on the CDMA CLOCK MUX OUTPUT connector by pressing the Config to select the CONFIGURE screen, then selecting the Frame Clock field to display the list of choices.

•Nominal output level is >+5 dBm

•Output impedance is 50 Ω

•All frame clocks are locked to the Test Set’s timebase, internal or external. Refer to the TimeBase field on the CONFIGURE screen.

See Also

Frame Clock field description, on page 263

EVEN SEC INPUT field description, on page 72

COMPOSITE VIDEO

The composite video output provides a signal for using an external video monitor. The signal provides a duplicate of the Test Set’s screen.

Operating Considerations

•BNC

•A multi-sync monitor must be used to match the video sync rate of 19.2 kHz. Example monitors include - Electrohome ECM 1410-DMS 14-inch color monitor and the EVM 1242-P4VID 12-inch monochrome monitor.

71