Manuals / Agilent Technologies / Video Game / Video Games

Agilent Technologies E8285A manual FM Deviation Call Control

Models: E8285A

1 464

Download 464 pages 57.8 Kb

Page 262

Chapter 4, Description of Fields

Fields

FM Deviation

This is the default measurement for this field. The FM Deviation field displays the frequency deviation between the FM signal and the carrier. The FM Deviation measurement field is only displayed when the AF Anl In field is set to FM Demod or FM Mod.

See Also

Atten Hold field description, on page 169

AF Anl In field description, on page 155

Screens Where Field is Present

DUPLEX TEST

ANALOG MEAS

AF ANALYZER

RF ANALYZER

RF GENERATOR

TX TEST

FM Deviation (Call Control)

This field displays the measured FM deviation of the carrier being transmitted by the mobile station. Four dashes (----) indicate that no carrier is present to measure.

See “Measure” in the GPIB Command Syntax chapter of the E8285A Condensed Programming Reference Guide for programming command syntax.

A numeric value would only be displayed in the connected state (that is, the Connected annunciator is lit). The FM Deviation field is only displayed when the Display field is set to Meas.

Refer to the "Display" field on page 223 for information on how to read measurement results from this field.

When the CALL CONTROL screen is displayed, the Test Set’s instrumentation is configured for optimal performance of the signaling decoder. Two characteristics of the instrumentation which have a significant affect on the performance of the signaling decoder are: 1) audio frequency gain and 2) post detection filtering.

While the CALL CONTROL screen is displayed the audio frequency gain stages are fixed (that is, autoranging is tuned off). This is necessary to ensure that no signaling bursts are missed as a result of the audio gain stages autoranging in response to a burst of signaling data. Fixing the audio gain stages may result in a slight accuracy degradation for FM deviation measurements less than 7 kHz.

262

S:\agilent\e8285\REFGUIDE\MANUAL\fields.chp

Image 262

Agilent Technologies E8285A manual FM Deviation Call Control

Contents

Reference Guide Copyright License under the clause at Dfars 52.227-7013 APR Manufacturer’s Declaration HerstellerbescheinigungGeneral Safety Considerations for this Instrument Product Markings Mobile Station Test Set Duration of Warranty 1 year E8285A Cdma\agilent\e8285\REFGUIDE\MANUAL\frntmt.fb Declaration of Conformity Agilent Technologies E8285A Support Contacts Regional Sales and Service Offices This Book TestingTesting and for analog testing Technologies E8285ADocumentation Map Specifications 5968-8839E Instrument Basic User’s Handbook E2083-90000Contents 101 100102 106 104105 108144 148Cmax Dsat ESN Contents MS FER Rand Randu SID MSB System ID 418 System Type Call Control Contents Description of Keys Keys are listed in alphabetical orderAgilent Technologies E8285A Front Panel Answer KeysAddress This sets the Test Set’s Gpib address toSee Also AssignAverage Programming AverageOutput 714MEASAFRDISTNAVERSTAT on Call/Page CancelEEX Enter Ibasic resetEnd/Release HoldThis queries the increment value for the RF Gen Freq field Increment ÷10, Increment set, IncrementProgramming Increment set Output 714RFGFREQINCRMODE LOG Increment value from 10 MHz to 1 MHz FrequencyProgramming Increment÷10 Programming Increment ×10 K1 K5, & K1’- K3’Cannot be changed Low limit, High limit Puts the device at address 14 in local modeLocal Programming LocalOutput 714MEASAFRDISTNHLIMSTAT? Used to display the high and low measurement limit values Analyzer FM deviation measurementDeviation measurement Viation measurement have been exceeded HLIMitEXCeeded? and LLIMitEXCeeded? commands to detect if aYES To Detect If a Measurement Limit Has Been Exceeded. UseThis resets all of the active measurements in the Test Set Meas resetProgramming Meas reset Programming Meter MeterTo Turn the Meter on and OFF To Set the Number of Intervals on the Meter To Query the State of the MeterTo Query the Number of Intervals on the Meter Graph meter high endpoint and low endpoint Endpoint to 10 watts for the TX power measurementMeter for the TX power measurement To Set the Meter High End and Low End PointsTo Set the Meter High End and Low End Point Display Units Graph meter for the TX power measurement to dBmTo Query the Meter High End and Low End Point Display Units No Ratio W PowerPreset On/OffPrint This recalls the instrument state saved in the file SETUP1See Also Print Configure Screen on RecallRef set Programming Ref setCommands to query a measurement reference point Set a measurement reference pointMeasurement to dBm Release This saves the instrument state to a file named SETUP1Register SaveShift Yes On/Off To 9, decimal point ., +/-, and a to FDown-Arrow, Up-Arrow Symbol KeysBackspace E8285A User’s GuideUnits-of-Measure Keys Front Panel Knobs Miscellaneous HardwareCursor Control Knob Programmable Front-Panel Keys for Screens Key Name Screen Displayed Gpib ExampleNon-Programmable Front-Panel Keys and Functions Guidelines for Using Measurement Data Functions Data Functions KeysGuidelines for Using Numeric Entry Field Data Functions User Keys Description of Connectors Connectors are listed in alphabetical orderDescription of Connectors Agilent Technologies E8285A Rear PanelAntenna ConnectorsOperating Considerations Audio in LOW, High AUD Monitor Output Audio output is used to output signals from AF Generators 1Audio OUT See Also Scope To field description, onCell SITE/TRIGGERS Cdma Clock MUX Output Composite VideoEven SEC Input Duplex OUTSee Also Cdma Clock MUX Output field description, on Gpib EXT REF InputSee Also Gpib Adrs field description, on Modulation Input Pin assignments for this connector are as followsPaging Channel Logging DCS2 Parallel Port Protocol SerialRF IN/OUT SA Trig OutputSerial Port Serial Port 16X Chip Output Traffic Channel Logging DCS1See Also Cell SITE/TRIGGERS on MHz Output See Also EXT REF Input onDescription of Screens These screens are listed in alphabetical orderAdjacent Channel Power Screen Adjacent Channel Power ScreenHow the Test Set Measures Adjacent Channel Power ACP AF Analyzer Screen AF Analyzer Block Diagram onAF Analyzer Screen AF Analyzer Block Diagram AF Analyzer Functional Block DiagramCall Control Screens Call Control ScreenCall Control Screens Analog Meas Analog Meas ScreenRequirements for Using The Analog Meas Screen How To Program The Analog Meas ScreenCall Control Screens Authentication Authentication ScreenCall Control Screens Call BIT Call BIT ScreenUsing the Call BIT Screen General SyntaxExample of Querying a Single Field Call BIT Screen Signaling Message NamesExample Printout General Syntax’ Printed Test Set Response MessageExample of Modifying Multiple Fields With One Output Call Control Screens Call Configure Call Configure ScreenCall Control Screens Call Data Call Data ScreenMessages which can be viewed are Reading the Call Data Screen Message Fields AwordQuerying a Single Field Example of Querying a Single Field Querying Multiple Fields With Single OUTPUT/ENTERCdma Authentication Screen Cdma Authentication ScreenCdma Call Control Screen Cdma Call Control ScreenCdma Cell Site Configuration Screen Cdma Cell Site Configuration ScreenCdma Cellular Mobile Receiver Test Screen Cdma Cellular Mobile Receiver Block Diagram onCdma Cellular Mobile Receiver Test Screen Cdma Cellular Mobile Receiver Block Diagram OUTCdma Cellular Mobile Transmitter Test Screen Cdma Cellular Mobile Transmitter Test ScreenCdma Gated Power Screen Cdma Gated Power ScreenCdma Generator Control Screen Cdma Generator Control Block Diagram onCdma Generator Control Screen Cdma Generator Control Block Diagram LatorCdma Mobile Reported FER Screen Cdma Mobile Reported FER ScreenCdma Mobile Reported Pilot Strength Screen Cdma Mobile Reported Pilot Strength ScreenCdma Open Loop Time Response Screen Cdma Open Loop Time Response Order ScreenCdma Reverse Channel Spectrum Screen Cdma Reverse Channel Spectrum ScreenCdma Short Message Service Screen Cdma Short Message Service ScreenCdma Swept Power Measurement Screen Cdma Swept Power Measurement ScreenCdma Transmitter Power Range Test Screen Cdma Transmitter Power Range ScreenConfigure Screen Configure ScreenDuplex Test Screen Duplex Test Block Diagram onDuplex Test Screen Duplex Test Block Diagram Duplex Test Functional Block DiagramHelp Screens I/O Configure Screen Message Screen Oscilloscope Screens Oscilloscope Screen and MenusUsing the Scope To Field Oscilloscope Input IndicatorSelecting the Oscilloscope’s Input Print Configure Screen Printer Configurations ScreenRF Analyzer Screen RF Analyzer Block Diagram onRF Analyzer Screen RF Analyzer Block Diagram RF Analyzer Functional Block diagramRF Generator Screen RF Generator Block Diagram onRF Generator Screen RF Generator Functional Block Diagram 2IIRX Test Screen RX Test Block Diagram onRX Test Screen RX Test Block Diagram RX Test Fields and Their FunctionsService Screen Select Service from the To Screen menuSpectrum Analyzer Screens Menus are accessed using the Controls fieldTo access the functions without having to change menus Spectrum Analyzer Screen and MenusSetting Resolution Bandwidth and Sweep Rate Using the Spectrum AnalyzerAutomatic Calibration Description of the Tests Subsystem Tests ScreensTests Main Menu Screen Or SET UP Test SET lists Tests Main MenuThis screen displays the channel frequencies to be tested Tests Channel InformationTests Channel Information Screen Tests Test Parameters Tests Test Parameters ScreenTests Order of Tests Tests Order of Tests ScreenTests Pass/Fail Limits Tests Pass/Fail Limits ScreenTests Save/Delete Procedure Tests Save/Delete Procedure ScreenTests Executions Conditions Tests Execution Conditions ScreenTests External Devices Tests External Devices ScreenTests Printer Setup screen determines how tests are run Tests Printer SetupTests Printer Setup Screen Tests Ibasic Controller Tests Ibasic Controller ScreenTX Test Screen TX Test Block Diagram onTX Test Screen TX Test Block Diagram TX Test Functional Block Diagram146 Description of Fields Field descriptions are listed in alphabetical orderFields Access annunciatorScreens Where Field is Present Abort PrintAcc Prb Pwr Avg PowerSelects the Access Probe Power measurement Acc Prb Pwr150 Access Probe annunciator AC LevelActive Turned on Active annunciatorACP Meas Base station is not activeEnters 8 in the Add Intcpt field Add IntcptAddr Tests External DevicesAF Anl AF Cnt GateAF Freq AFGen1 Freq AFGen1 LvlAFGen2 Freq AFGen1 ToThis field has two fields AFGen2 To Entering an Akey Directly into the Test Set AKeyGenerating a New Akey Key Digits Enters a 1 preceded by 19 0’s in the A-Key fieldThis field sets the Alert parameter in SMS messages AlertAll Chans? Sets the Alert parameter to OnAlt Pwr Ms Cal Bands Selects All Bands in the Alt Pwr Ms Cal Bands fieldQueries the Cdma amplitude error measurement result Ampl ErrorAM Depth See Also Atten Hold on Screens Where Field is Present AmplitudeSelects manual mode Amplitude Cdma Swept Power MeasurementAnswer Mode Sets the trigger amplitudeArm Sets the remote operation trigger mode to SingleAntenna Triggers all active measurementsDisarm field description, on Screens Where Field is Present Queries the Cdma gated power attack timeAttack Time Atten Hold This field sets the Audio in LO connector’s stateAudio In Lo Audio Out Turns Authentication OnAuthentication Tests, E8285A Application Guide AuthenQueries the Cdma Authentication Data Table Authentication Data TableClears the Authentication Data Table Authen Data ClearReading the Authentication Data Table over Gpib Data Position Numeric Value173 Programming Example for Authentication Data Table END Select175 Auto/Norm AuthentThis field specifies how the trigger level is set Auto Zero Autostart Test Procedure on Power-UpTests Execution Conditions Operating Considerations for the Average Power Measurement Avg PowerAverages Queries the average power measurement Selects the average power measurementZeroes the average power measurement See Also Chan Power on Awgn Sets the Awgn generator’s level to −75 dBmSets the Bandclass parameter to Band ClassIf Bandclass 1 or 4 is selected Base Frequency is calculated using the following formula Base Freq User DefinedBeeper Base IDParameters Message from the Test Set BER Thresh Queries the Cdma gated power burst time Burst TimeBW= By # errorsThis field is coupled to the Span field’s setting Range of ValuesBy # frames Called NumberCall Limit This field is used for measuring access probe power levelsCalling Name Limits call progress to the paging channelRegistering annunciator on Call StatusCdma Status Register Bit Definitions 360Carrier Ref CarrierQueries the carrier feedthrough measurement result CC Order Center Freq AnalogChange Selects n up power control stepsCenter Freq Cdma Sets the center frequency to 850 MHzChan Chan is divided into two fieldsChannel Cdma to Analog or Interband Handoffs Sets the Channel field toChannel BW Selects Channel Power measurements Chan PowerQueries the channel power measurement Operating Considerations for the Channel Power Measurement Chan Power Meas IntrvlSets the measurement interval to 1 ms Check Chan StdTests Pass/Fail Limits MS Database field on Timer Reg field onCheck Digits Register Cdma field onFor Ntacs systems, the choices are Ch LocSyntax and an example for Ntacs systems are as follows Ch Offset Chan Space User DefinedEventually dropped. See Drop Timer on This field sets the power control modeSelects Open Loop power control mode Closed Loop Pwr CntlThis field is used to clear the Ibasic controller screen Clr ScrCmax Tests Ibasic ControllerCntl Chan CCHannel command is used to control this fieldCurrent control channel setting Cnfg External DevicesCode Location Test Save/Delete ProcedureCntry Code Sets the base station’s country code toConfidence This field sets the confidence coefficient for FER testingSets a confidence coefficient of 95% Range of values floating point number 80 through Connect annunciator Continue When a call is terminated, this annunciator will go outConnected annunciator SweredCont/Single Controls Cdma Gated PowerControls Cdma Reverse Channel Spectrum Controls Open Loop Time Response Controls Cdma Swept Power MeasurementDefault selection is Main Select among the followingControls Spectrum Analyzer Controls OscilloscopeCurrent Data Length Data ModeSets the User Data field data format to hexadecimal Data Rate Selects full-rate data transmissionHow to read the contents of the individual messages Data SpecData Type Selects PrbsDate DC CurrentDC Level Delete Ch De-Emp GainDe-Emphasis Tests Channel InformationDescription Delet InsDelet Stp Tests Order of Tests, External DevicesDetector Detector TypesDisplay DisarmStops a measurement in progress Setting the Display field to Data Call Control Screen Received Data Fields Information Strings Available From The Received Data Fields Information Strings Available When a Decoding Error Occurs Information Strings Available from Reverse Voice ChannelSetting the Display Field to Meas Call Control Screen with Meas Selected Call Control Screen with NMeas Selected Display User Mssgs Enables displays of user messagesDisplay Interim Results Displays interim FER resultsOn how to read the contents of the individual messages Display WordMRI Ord Display Word Choices AuthWORDBSChalOrd Nrvc OrdRVCOrdCon RVCBSChalRVC Ord UniqChCon235 Distn Enters 4 in the Drop Intcpt field Drop IntcptSee Also TDrop field description, on This field turns the call drop timer on or off Drop TimerTurns off the call drop timer Dsat DSAT/DST hex Sets the Dsat field to 0 2556CBCall Control when Namps is selected in the System Type field Dsat MeasDuplicate User Data Duplex OutEnters 2 times in the Duplicate Entered Data field Eb/Nt Echo DelayDelays your voice 2 seconds Queries the Eb/Nt fieldEncoding Selects the Octet formatEnter Ascii Data Enter Hex DataErrors Enter Procedure FilenameTests Save/Delete Procedure Errors Counted Queries the FER errors measurement resultEnables escape mode Esc ModeESN dec ESN hex ESNExecute Handoff Executes the handoffExec Execution Cond Execute Closed Loop Power Control ChangeExpected Expected PN Offset Queries the expected PN Offset value for Sector aExample Expected StrengthQueries the expected pilot strength value for Sector a Expected TAdd Queries the Expected TAdd value calculated by the Test SetExpected TDrop Queries the Expected TDrop value calculated by the Test SetExternal Disk Specification Ext Load RSTD-008 Kor PCS Ext NghbField on FER Queries the currently displayed FER measurement resultFER Spec Clears the Errors Reported and Frames Reported fieldsFER Report Clear FF at EndFF at Start FilterFlow Cntl FirmwareFM Coupling FM Deviation FM Deviation Call ControlFrame Clock Frames Counted FramesQueries the FER frames measurement result Queries the Cdma frequency error measurement result Freq Error CdmaSelects frequency error from the list of choices Freq Channel InformationDisplays the Freq Error measurement field Freq Error AnalogCall Control when Meas is selected in the Display field Frequency Analog Gain Cntl Gate TimeSee Also Num of Bits field on Grid Gen-AnlTurns off the display grid Sets the grid to on or off Grid Cdma Swept Power MeasurementHandoff This field is used to initiate a handoffHard Handoff annunciator Executes a Cdma to Analog handoffIbasic Echo Gpib AdrsIbasic Ibasic Cntrl Ideal Mobile Power Queries the Ideal Mobile Power fieldIf Unit-Under-Test Fails Init PowerIf Filter Sets Initpwr toInput Att Information Ator hold modeInput Atten Requires you to set the needed amount of input attenuationInput Gain Input Port Insert Ch Insrt InsInst Echo Insrt StpInst# Keep InternalThis field selects the trigger source Queries the length of the current SMS message length LengthProgramming Example for Keep Field Lines/Page Level divLibrary Lower and Upper ACP RatioLevelLower Limit Lvl Cdma Gated PowerQueries the level at the current marker position Lvl Open Loop Time Response Main MenuQueries the frequency at the marker’s present position Marker Lvl Cdma Swept Power MeasurementMarker Freq Queries the amplitude at the marker’s present positionMarker Lvl Selects Delta in this field Marker Norm/DeltaMarker Time Queries the difference in frequency between the two markersPositions the marker in the center of the display Marker Time Cdma Gated PowerMarker Pos Cdma Reverse Channel Spectrum Positions the marker at 0 microsecondsPositions the marker at 0 milliseconds Marker Time Cdma Swept Power MeasurementMarker Time Open Loop Time Response Position is settable in units of millisecondsMarker To This field sets the maximum frame count for each FER test Mask TypeMax Frames Sets the maximum number of frames for FER measurements toExecutes a Min/Max Power measurement Max PowerQueries the Max Power measurement value Sets both parameters to Max Req Seq, Max Rsp SeqMax Slot Cycle Index Sets the cycle to 2.56 secondsCdma Gated Power unlabeled Message Data ModeSets the measurement mode to single Meas CntlQueries the Min Power measurement value Min PowerMic Pre-Emp Causes the Test Set to execute a Min/Max Power measurement Min/Max PwrIdentifies the mobile station parameter MUX1REV1 Mobile ParmSets the mobile station’s MUX1REV1 parameter value to Mobile Power Mode Mode Mobile PwrModel Mod In To MS Id Syntax for MS Id FieldMS Ack Cause Code 304 Screens Where Annunciator is Present MS Ack Rcvd annunciatorMS Database MS FER Protocol field onMS ID MS FER Report IntervalSets the mobile station’s FER report interval to 160 frames Enters the mobile station’s phone number Enters the mobile station’s MIN numberOperating Considerations for MS ID Field Netwrk Code Network IDSets the base station’s network code to Nghb Fq Ch Sets Nompwr to Nom PowerNom Pwr Ext Sets Nompwrext toNo Pk/Avg Normalize Notch Freq Notch GainBuffer has a maximum capacity Notch CouplNum of Bits See Also Gate Time field onSets the Num Pages field to two Num PagesNum Step Sets Numstep toOcns Sector a Power Sets the Ocns Walsh code toOffset Freq Ocns Sector B PowerSets the Walsh code for the Ocns to Open Loop Time Response Execute Executes a time response to open loop power control testOptions Order Orig Addr Enters 1111111 in the Orig Addr fieldOutput Heading Tests Printer Setup, Execution ConditionsOutput Atten Hold Holds the output attenuatorsOutput Results For Tests Execution Conditions, Printer SetupOutput Port This field selects the RF output port on the Test SetOutput Results To Syntax ExampleRate AnnunciatorSets the Page Rate field to full Send Specifies the messages to be sentSee Also Call/Page on Screens Where Field is Present Paging Sector a PowerSets Sector a pilot power to −16 dB Sent annunciatorParm Test Parameters Pam SizeParameter Sets Pamsz toParity Pass WordPhone Num PcmciaThis field provides re-formatting of Pcmcia cards Selects phase error from the list of choices Phs ErrorQueries the phase error measurement result Sets Sector a pilot power to −7 dB Pilot Sector a PowerPilot Sector B Power Sets Sector B pilot power to −7 dBPilot Inc Sets the Pilot Inc field toPilot Meas Clear Clears the contents of the Cdma Mobile Reporting tablePk Det To PN Offset Programming Example Status States Decimal Pilot Strength Level is abovePN Offset Sector B Power PN Offset Sector a PowerSets the pilot PN offset index to Position Port/SweepThis control performs two functions Power Cntl Step Size Refer to the Avg Power field description, on Gpib Example Power MeasRefer to the Chan Power field description, on Operating Considerations, Power ZeroPrint All Power StepThis field allows entry of the power increment Pwrstep Sets Pwrstep toPrinter Address Print Printer SetupPrint Data Destination Printer PortPriority Sets the Priority parameter to UrgentPrivacy Procedure LibraryProc Save/Delete Procedure Sets the Privacy parameter to RestrictedProtocol Setting up a Call chapter in the E8285A Application GuideProgram This field provides a choice of these protocol selectionsPwr Level Enables or disables power down registrationPwr Dwn Reg Sets the Pwr Level Vmac field toLeft-Hand Field Pwr LvlPwr Lvl field is divided into two fields Right-Hand FieldPwr Up Reg Randa RandQueries the Rand field Randssd See Also SSD Update field on Screens Where Field is PresentRandb Queries the Randssd fieldRANDSSD1 RANDSSD2RANDSSD3 RanduRange Hold See Also Uniq Chall field on Screens Where Field is PresentQueries the Randu field Rcv Pace Receive pace field is used when receiving serial dataReceived Sets the reference level to 0 dBm Ref Level Cdma Swept Power MeasurementRef Level Sets the reference level high valueSets the timer-based registration period to Reg PeriodRegister Cdma Register AnalogCauses the mobile to register MS ID field description, on Screens Where Field is Present Register annunciatorRegistering annunciator Queries the Cdma gated power release time Release TimeReset Res BWRF Channel analog RF Anl Freq Cdma Swept Power MeasurementSpectrum Analyzer When the Controls field is set to RF Gen Selects the RF analyzer frequencyRF Channel Cdma Selects channelRF Chan Std Mobile Test Channel Range MHz Numbers E8285A Generate E8285A ReceiveRF Cnt Gate RF DisplayRF Gen Volts RF Gen FreqSets the RF generator to 815 MHz RF Level Offset RF Offset RF OutQueries the RF Power level RF PowerRgstr NID Rgstr SID Rssi ThreshRX/TX Cntl SAT RunRun Test Sets the SAT field to 6000 HzSAT field is divided into two fields SAT Deviation TX Test AnalogSat Tol Save/Recall SCMScope To Sc PrioritySets the search priority level in the custom neighbor list Sctr a Pwr Sets Sector A’s power to −100 dBmTurns on Sector a Select Procedure Filename Sctr B PwrTests Save/Delete Procedure Tests Main Menu Select Procedure LocationSend Msg Send Word Send Msg Cdma Swept Power MeasurementSTD-008 Kor PCS TSB-74 Serial Baud SensitivityThis area performs two functions Serial No Serial9This field displays the serial number of the Test Set Set Message Choices Set MessageBSChalCon FVCUniqCh FVCBSConFVC O Mes FVC V MesMS InVCh MSMessOrdRandChalA RandChalBUniqChOrd Call Bit Set Message Field Descriptions391 OHD This field displays the overhead message type 393 Settling Seqn Order of TestsSID MSB Sinad Slope Cdma Swept Power MeasurementSets the trigger slope SMS In Progress annunciator SMS Sent annunciatorSngl Step SNR SNR OperationThis field controls softer handoffs Softer HandoffBegins a softer handoff Queries the Cdma condition register Softer Handoff annunciatorSoft Slope This field is used to enter the parameter SoftslopeSpeaker ALC SpanSets the frequency span to 3 MHz Spec Pass/Fail Limits Speaker VolSpec# Squelch Srch Win a Sets search-window a toSrch Win N Sets search-window N toSSDA=0 annunciator Srch Win RSets search-window R to Ssda Ssdb Initiates the SSD Update procedure SSD UpdateAuthentication Tests, E8285A Application Guide SSD Update annunciator Status Mobile Reported Pilot StrengthProgramming example for Status Field Operating Considerations for Status Field Status Cdma Swept Power Measurement Zzzz new Status Cdma AuthenticationQueries for the arming status of the measurement Steps 251 Screens Where Field is PresentStep Size Step# Stop LengthStrength Programming Example for Strength FieldThis field allows for arming the swept power measurement Swept Pwr Cdma Swept Power MeasurementSync Sector a Power Arms the measurementSystem ID System Type Call ControlSystem Type CDMA-to-CDMA or CDMA-to-Analog Handoff All instances, the default is AmpsSelects the Amps system type for a Cdma to analog handoff Sets Tadd to TAddTComp Sets Tcomp to Operating ConsiderationsThis field allows entry of the pilot drop threshold Tdrop TDropSets Tdrop to Test Name Handoff Drop Timer Expiration ValuesTTDrop Sets Ttdrop toTest Procedure Run Mode Test StatusThis field is duplicated on the Cdma Call Control screen This annunciator is lit when a FER test is in progressMeasured FER is displayed as 0.6% Example Failed FER measurement Measured FER is displayed as 1.4%Failed annunciator Max Frames annunciatorTime Configure TimeBaseQueries the Cdma time offset measurement result Time/divTime Offset Frequency Accuracy Definition IS-98Timer Reg Time Offset NegativeSelects Traffic Rho as the current Rho measurement TM Test Mode RhoTM Rho Queries the current Rho measurement resultTo Screen ConfigAnalog This field clears the measurement from the display Trace Cdma Swept Power MeasurementTotal RAM Clears the screenSets Sector B’s pilot power to −16 dB Traffic Sector a PowerTraffic Sector B Power Sets the Walsh cover for Sector A’s traffic channel toTraffic Data Mode Selects service optionTraffic Rho Transmitting annunciatorTrig-Delay Tune Freq TX Power Transmitter Power measures RF power at the RF IN/OUT port438 TX Pwr Meas TX Pwr Zero Type Initiates a Unique Challenge-Response procedureUniq Chall Uniq Chall annunciator UnitsUser Data Ascii or Hex Selects Ascii data entry mode for the User Data fieldUpper Limit Enters the Ascii string Call Home in the User Data fieldVC Order Vert/div Vert OffsetSets Sector A’s traffic channel to Walsh code Walsh Sector aWalsh Sector B Sets Sector B’s traffic channel to Walsh codeTransmit pace field is used when transmitting serial data Xmt Pace448 Index Numerics450 Index 451 452 Index 453 454 Index 455 456 Index 457 458 Index 459 460 Index 461 462 Index 463 464