Enterasys Networks XSR CLI verify, write

File System Commands
3-120 Configuring the XSR Platform
verify
Thiscommandverifiesapackedsoftwareimagefile.Thefilenamemustendin*.fls.Ifthe
directorynameisnotspecified,thecurrentdirectoryisused.
Syntax
XSR#verify [flash: | cflash:]filename.fls
Mode
PrivilegedEXEC:XSR#
Sample Output
ThefollowingsampleXSR1800Seriesoutputdisplaysacorrectmessage:
XSR#verify xsr1800.fls
Verifying SW image file, j.fls
File chksum=0xeb14
SW Image size=070452 sum=0x6a9e compressed_size=1578677 entry=0x10000
Diagnostics size=815012 sum=0x2a32 compressed_size=266244 entry=0x10000
xsr1800.fls is a valid S/W image file
oranerrormessage:
Invalid chksum(0xf2d9)!=Expected chksum0x4800
write
ThiscommandwritestherunningconfigurationtoFlashmemory,anetworkTFTPserver,ora
terminal.Onlyvaluesdifferentthandefaultsettingsarecollectedanddisplayed.
Syntax
write erase
write terminal
write network flash: filename
write network tftp:[[/location]/directory/]filename
Sample Output
Controller t1 1/0
Clock source line primary
Framing esf\
etc.
flash: FilelocatedintheFlashdirectory.
cflash: FilelocatedintheCompactFlashdirectory.
filename.fls Nameofapackedsoftwareimagefile.