Enterasys Networks XSR CLI debug ip dhcp server, default-router

DHCP Commands
XSR CLI Reference Guide 15-87
debug ip dhcp server
ThiscommandenablesDHCPserverdebugging.Thiscommandshouldbeusedfor
troubleshootingpurposesonly.
Syntax
debug ip dhcp server {events | packets | linkages}
Syntax of the “no” Form
UsenoformofthiscommandtodisableDHCPserverdebugging:
no debug ip DHCP server {events | packets}
Default
Disabled
Mode
PrivilegedEXEC:XSR#
Example
ThefollowingexampleenablesDHCPservereventsdebugging:
XSR#debug ip DHCP server events
default-router
ThiscommandspecifiesthedefaultrouterlistforaDHCPclient.Dependingontheclient
configurationinheritance,thecommandshouldbeusedfromthepropermode.Ifitisspecified
frommultiplemodes,anoverridemechanismchoosestheinnermostconfigvalue,withhostas
innermost,thenclient‐classandpoolasthemostgeneral.
Syntax
default-router address [address2...address8]
Syntax of the “no” Form
Usethenoformofthiscommandtoremovethedefaultrouterlist:
no default-router
events Reports server events, such as address assignments and database updates.
packets Decodes DHCP receptions and transmissions.
linkages Displays database linkage data such as parent-child relationships in a radix tree.
address IP address of a default router. One IP address is required.
address2
...address8
Specifies up to eight addresses in the command line listed in order of preference
(default router address has the highest priority, then router address 2, etc.).