Enterasys Networks XSR CLI - page 181

OSPF Debug and Show Commands
XSR CLI Reference Guide 5-105
Syntax of the “no” Form
Thenoformofthiscommandreturnsthedebugfunctiontothedefault:
no debug ip ospf packet
Mode
EXECconfiguration:XSR>
Examples
ThefollowingexampledisplaysatransmittedHellopacket:
OSPF: Tx PKT. Hello v:2 t:1 l:44 rid:1.1.1.4 aid:0.0.0.5 chk:fa94 aut:0000 from
GigabitEthernet 2 to 224.0.0.5
ThefollowingexampledisplaysareceivedHellopacketthatfailedverificationbecausetheareaID
doesnotmatch:
OSPF: Rx PKT. Hello v:2 t:1 l:44 rid:10.0.0.1 aid:0.0.0.3 chk:e9a2 aut:0000 from
GigabitEthernet 2 is NOk
ThefollowingexampledisplaysareceivedHellopacketthatpassedverification:
OSPF: Rx PKT. Hello v:2 t:1 l:48 rid:10.0.0.1 aid:0.0.0.5 chk:8846 aut:0000 from
GigabitEthernet 2 is Ok
Thefollowingexampledisplaysareceiveddatabasedescriptionpacket:
OSPF: Tx PKT. Database v:2 t:2 l:172 rid:1.1.1.4 aid:0.0.0.5 chk:7204 aut:0000
from GigabitEthernet 2 to 53.53.53.21
Thefollowingexampledisplaysatransmittedlinkstaterequestpacket:
OSPF: Tx PKT. LS request v:2 t:3 l:228 rid:1.1.1.4 aid:0.0.0.5 chk:99d5 aut:0000
from GigabitEthernet 2 to 53.53.53.21
Thefollowingexampledisplaysareceivedlinkstateupdatepacket:
OSPF: Rx PKT. LS update v:2 t:4 l:96 rid:10.0.0.1 aid:0.0.0.4 chk:7214 aut:0000
from GigabitEthernet 2.2 is Ok
Thefollowingexampledisplaysatransmittedlinkstateacknowledgepacket:
OSPF: Tx PKT. LS Ack v:2 t:5 l:44 rid:1.1.1.4 aid:0.0.0.5 chk:b63d aut:0000 from
GigabitEthernet 2 to 53.53.53.21
Parameter Descriptions
TxPKT OSPFPackettransmitted.
Hello OSPFHelloPacket.
v:2 OSPFVersion.
t:1 OSPFPacketType.
l:44 OSPFPacketlength.
rid:1.1.1.4OSPFRouterID.
aid:0.0.0.5 OSPFAreaID.
chk:fa94 OSPFPacketChecksum.
aut:0000 Authentication.
fromGigabitEthernet2Outgoinginterface.
to224.0.0.5 DestinationIPaddress.